Adjusting the stops on the UG Stand

[misterx]

Hi, my right stop on my UG stand is 1mm off, I can't turn the nut to adjust distance. How do ya adjust the stop. Thanks Tim

 

[tjbnwi]

I have no clue what you're referring to.  The only stop I know of is the flip stop for repeat material cuts. It is adjustable over the length of the wing. How about a picture?

Tom

 

[misterx]

That is what I am talking about the flip stop. When I make a cut and measure the board, the board is 1mm shorter than the setting on the wing. Can I adjust that flip stop to read 1mm shorter? Thanks Tim

 

[Runhard]

You need to adjust the extensions. You have to loosen the screws found on the bracket (which fits into the v-grove of the Kapex) on the underside of the extensions, make the adjustment and then tighten the screws. That's what I did to mine. Or you could just add 1mm to your cutting measurement to give you the perfect finish cut  [poke]

Daniel

 

[jonny round boy]

I did a how-to on this a couple of years ago, with pictures. Link

 

[tjbnwi]

Now I got it, you're not trying to adjust the flip stop, you're trying to adjust the scale.

As mentioned, adjust the bracket.

Tom