Advice on design of table top - for wood expansion

[ldavies]

I am making a side table that has a top made of plywood with a maple veneer and edges made of solid walnut as you can see in the image below.  I was going to use my domino to add dominos where I have indicated in red (total of 12) and glue the walnut to the edge of the plywood.  My questions are:
1) is it overkill with all the dominos
2) how should I take into account wood expansion

FYI I am in Northern California which is pretty dry all year round if that helps when thinking about wood expansion and contraction.

Thanks much for suggestions and advice.

Lloyd[attachimg=#]

 

[Scott W.]

The ply shouldn't move much and looks like the frame is relatively narrow so if the wood is dry & aculmated it wont move much either.

If your really concerned let the ply float in the frame.

Scott W.

 

[ldavies]

OK thanks for your advice.

 

[Spike]

Agreed. You're good.