Joos
Member
- Joined
- May 8, 2014
- Messages
- 20
Following the completion of a similar dining room table (posted May 2104), a colleague wanted the exact same table.
Made a number of minor changes however by adding another cross support for the drop-in top, more subtle V-grooves and experimented with finer end grain for some of the legs.
[attachthumb=#] [attachthumb=#]
In progress
[attachimg=#]
[attachthumb=#] [attachthumb=#] [attachthumb=#] [attachthumb=#] [attachthumb=#] [attachthumb=#]
As suggested by Matthew Schenker a plan, cutting list and drilling diagram are also included. Some statistics on consumables: 93 Biscuits were used for the legs and drop-in top and 178 screws and 48 Kreg screws for assembly
Made a number of minor changes however by adding another cross support for the drop-in top, more subtle V-grooves and experimented with finer end grain for some of the legs.
[attachthumb=#] [attachthumb=#]
In progress
[attachimg=#]
[attachthumb=#] [attachthumb=#] [attachthumb=#] [attachthumb=#] [attachthumb=#] [attachthumb=#]
As suggested by Matthew Schenker a plan, cutting list and drilling diagram are also included. Some statistics on consumables: 93 Biscuits were used for the legs and drop-in top and 178 screws and 48 Kreg screws for assembly
Attachments
-
MJT progress 1.JPG162.1 KB · Views: 651
-
MJT progress 2.jpg1.3 MB · Views: 968
-
MJT view 1.jpg1.8 MB · Views: 2,562
-
MJT view 2.JPG2.2 MB · Views: 419
-
MJT view 3.JPG3 MB · Views: 319
-
MJT view 4.JPG450.3 KB · Views: 407
-
MJT copper squares 1.jpg1.3 MB · Views: 366
-
MJT coarse end grain 2.jpg474.3 KB · Views: 442
-
MJT fine end grain 1.jpg1.5 MB · Views: 490
-
MJT plan and drilling list.pdf185.9 KB · Views: 241
-
MJT cutting list.pdf3.5 KB · Views: 209