BPCFinishing
Member
- Joined
- Apr 6, 2014
- Messages
- 84
[attachthumb=2][attachthumb=3][attachthumb=4]After seeing Ron's miter stand about six months ago, I quickly built a really generic version of the table. It was thrown together quickly, but I ended up liking it do much better than using my dewalt stand. Finally I have gotten around to making a more proper version. This is out of 3/4 finished plywood and some 5/4 pine for runners. I used 3/4 holes for some kreg dogs, but mostly I just wanted done holes for clamping options. The saw platform is mated to the rails with two dominoes for positioning and I also used dominoes to align the extensions. Very thankful for all the useful information here![attachthumb=1]
