Attic Storage -- show us what your set-up looks like

[ScotF]

I just brought home a new PDC and I am curious how others have set-up their attics - what do you typically store there - do you use all the compartments for screws and bits? Would appreciate reading and seeing some examples to get some ideas.

Thanks!

 

[Billy stray]

I don't have a pic on hand but I use mine for all the screw tips and frequently used drill bits etc that I need when using the drill / impact set up that lives in that systainer

 

[GarryMartin]

[attachimg=1]

 

[#Tee]

[attachimg=1]

garry! i need this...how can i make it happen? thanks! [smile]

 

[rst]

Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

 

[GarryMartin]

garry! i need this...how can i make it happen? thanks! [smile]

Some of the bits are from the Centrotec Installers set, and there's a Veritas tapered plug cutter in there too.

I basically bought two 769094 bit assortments (the second just to get the plastic bits basically!), a 769093 wood bit set, and a 492512 3mm Centrotec wood bit.
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769094https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769093https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=492512

 

[Kevin D.]

Murphy!  I thought this thread was about storage in a house's attic.  Doh!

 

[DB10]

T15 Impact and PDC,

 

[ScotF]

Excellent pics...love seeing the set-ups. Anyone use it for screws?

 

[#Tee]

Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

thanks for the info !

 

[#Tee]

garry! i need this...how can i make it happen? thanks! [smile]

Some of the bits are from the Centrotec Installers set, and there's a Veritas tapered plug cutter in there too.

I basically bought two 769094 bit assortments (the second just to get the plastic bits basically!), a 769093 wood bit set, and a 492512 3mm Centrotec wood bit.
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769094https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769093https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=492512

awesome! thanks for the spoon feed gerry!

 

[Cheese]

This is on an Imperial Installers Set 201312.

 

[semenza]

Good idea ... the added labeling on the self-centering bits.

Hmmm, one 1/4" wrench................ that must have a specific use?

Seth

 

[Cheese]

Hmmm, one 1/4" wrench................ that must have a specific use?

Ya it does Seth...combine that 1/4" ratcheting hex wrench with any short 1/4" hex drive bit and the combo can get into any small area that was impossible before. Think single metal electrical boxes mounted to studs through the sidewall of the box.  [smile]

 

[Staniam]

This has by far been my favorite attic setup. The Milwaukee titanium drill bit set fits perfectly.

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[ScotF]

What is the bottom lined with, [member=41633]Staniam[/member]?

Looks like a great set-up.

 

[ScotF]

[attachimg=1]

What is the bit in the bottom left of the attic, [member=11629]GarryMartin[/member]?

 

[Staniam]

[attachimg=1]

What is the bit in the bottom left of the attic, [member=11629]GarryMartin[/member]?

Looks like a counter sink bit. Like the one in the top middle of my picture. And a smaller counter sink next to it.

 

[sancho57]

Now you guys got me ready to buy a attic storage systainer , just to store some of my small bit boxes for my C 15.....

yer killing me doncha know

 

[GarryMartin]

What is the bit in the bottom left of the attic, [member=11629]GarryMartin[/member]?

If you mean the very bottom left, it's one of the Festool Deburring countersinks from the Installer Set. If you mean the third in from the left, that's the Veritas Tapered Snug Plug cutter.