I thought I would share this with the cabinet builders using Sketchup
I have been helping Paul Verhelst of CabinetSense with the oddities of UK cabinetry. CabinetSense works inside Sketchup as a parametric cabinet builder , it enables you to build single cabinets or complete kitchen layouts, once you have built a range of generic cabinet or use the library models you just drag and drop them from the component menu onto the plan and resized, all the components in each cabinet are resized for each cabinet.
All elements of the build are covered
Carcase material
Various types of construction
Layon or face frame, all the frames sizes can be changed
Slab or five piece doors
Drawer boxes in butt, dado or dovetailed construction
Customize drawers programmed to handle 4 types of slides, blum tandem, tandembox, metabox and accuride side mounted slides
Knob or handle selection and placement
The best part is with one click it will give you……….
Complete cutting list of materials which can be imported into Cutlist Plus for Sheet layouts
List of doors
List of drawer boxes
List of handles, hinges and runners.
Here are some video clips to give you an idea how easy is…….
Getting started
Cabinet basics
Drawer box
Cutlist
Face frames
Building an island
Wall cabinets
Exporting data
The software is in pre-production testing, Paul hoping to be able to release it to the public by the middle of the year.
_________________
Paul
If you only have a hammer then everything looks like a nail
http://www.fretworks.co.uk/
I have been helping Paul Verhelst of CabinetSense with the oddities of UK cabinetry. CabinetSense works inside Sketchup as a parametric cabinet builder , it enables you to build single cabinets or complete kitchen layouts, once you have built a range of generic cabinet or use the library models you just drag and drop them from the component menu onto the plan and resized, all the components in each cabinet are resized for each cabinet.
All elements of the build are covered
Carcase material
Various types of construction
Layon or face frame, all the frames sizes can be changed
Slab or five piece doors
Drawer boxes in butt, dado or dovetailed construction
Customize drawers programmed to handle 4 types of slides, blum tandem, tandembox, metabox and accuride side mounted slides
Knob or handle selection and placement
The best part is with one click it will give you……….
Complete cutting list of materials which can be imported into Cutlist Plus for Sheet layouts
List of doors
List of drawer boxes
List of handles, hinges and runners.
Here are some video clips to give you an idea how easy is…….
Getting started
Cabinet basics
Drawer box
Cutlist
Face frames
Building an island
Wall cabinets
Exporting data
The software is in pre-production testing, Paul hoping to be able to release it to the public by the middle of the year.
_________________
Paul
If you only have a hammer then everything looks like a nail
http://www.fretworks.co.uk/
