Cedar Planters

OXCanada

Member
Joined
Sep 13, 2014
Messages
60
My wife and I decided that our house needed some planters so this is what I built up, courtesy of plans provided by Tom Silva. Pretty pleased with how they turned out considering I had to use some pretty rough construction grade cedar since our local suppliers don’t stock much.

My gardening skills are leaving something to be desired, but on to the next project!
 

Attachments

  • DC054CBB-BF84-423C-8A1F-43F58ABB7F95.jpeg
    DC054CBB-BF84-423C-8A1F-43F58ABB7F95.jpeg
    3.8 MB · Views: 681
  • BA74601B-4069-4B30-B367-23C6084EA30F.jpeg
    BA74601B-4069-4B30-B367-23C6084EA30F.jpeg
    3.2 MB · Views: 474
  • CD92A3C0-AA43-465B-B9C9-8F486ACA96CC.jpeg
    CD92A3C0-AA43-465B-B9C9-8F486ACA96CC.jpeg
    3.1 MB · Views: 521
Nice... [smile]

I'm also interested in what you sealed them with.
 
Amazing what you can do with lumber that doesn't look like much if you're willing to work with it.  Nice work.
 
Thanks everyone!

I finished them with Minwax Helmsman, sprayed with my fuji MM4.  I am very new to finishing and so I am sure there are better products out there.  But so far they are holding up great and water beads up very nicely.
 
Very cool. I wanted to make some outdoor things out of the big box store (specifically home Depot for me) cedar, but my concern is that it's mostly sapwood. With that in mind, do you think they'd hold up better than just using cheaper pine or Doug fir boards? All sealed of course.
 
Here are the plans that I used.  No real changes needed.
https://www.thisoldhouse.com/how-to/make-cedar-planter

As far as wood selection goes, I think the typical outdoor woods are best.  However, Im sure pine or another wood could be fine.  It all depends on how well its sealed and the color that you want it to have.  I even thought about using the PVC trim board to make one with no maintenance.
 
Back
Top