Connecting 2 guide rails to produce an accurate reference edge?

[Sparktrician]

IF you are using the LR32 rails and are trying to maintain the hole spacing you need to use an end stop as a spacer while tightening the connectors I believe.

Peter

That is correct, Peter.

 

[fritter63]

GRC-12 Self-Aligning Guide Rail Connectors

Align and join your track saw guide rails perfectly with the GRC-12 Self-Aligning Guide Rail Connectors, eliminating the need for straightedges and other tools.

tsoproducts.com

These work great.

 

[cdconey]

Peter,
That is correct. At the time there was little, if any documentation included, or translated. that's when FOG was on Yahoo forums I IIRC.