Connecting two 27mm vacuum hoses

[landowner]

I have two of the vacuum systems and I would like to connect the two hoses and run them on one vacuum to do some elevated work at a distance from the vacuum.

I bought a hose sleeve - connector sleeve (ZA493047) but it is too large a diameter to connect the two ends..... can someone recommend what I need to connect two 27mm hoses to make a long run go hose please.
Thanks
Doug

 

[JCLP]

Hi Doug,

Here is a thread about this issue. Good luck.
Connect 2-27mm hoses

 

[copcarcollector]

[member=14002]landowner[/member]

You also need one 452892, basically you are putting two vac end connectors on one hose, this way you can use the 493047 you have, should work fine!

 

[landowner]

Thanks for the help on this. The picture makes it clear what I need... and why.
Regards
Doug