Mike Goetzke
Member
- Joined
- Jul 12, 2008
- Messages
- 1,133
Started work in on this almost two weeks ago. I used my track saw with TSO GRS squares and TPG parallel guide system to break down all of the ply. Maybe it’s just me but it was getting tiring changing to various rail lengths and TPG arms, but, it was the quickest I broke down this much ply down at one sitting. I was beat up at the end.
What a joy it was to be able to cut a miter on the track that I could line up the anti-chip to. With my old track saw system that used a standard circular saw the pivot point of the saw bevel made to cut line go where it wanted to and it wasn’t at the anti-chip.
I then used some of my other toys to assemble the cabinet boxes. I used a combination of wood screws, Kreg screws, and Dominos.
There is going to be a taller cabinet next to the left but need to see how everything fits before I glue it up.
View attachment 4
View attachment 2
View attachment 3
What a joy it was to be able to cut a miter on the track that I could line up the anti-chip to. With my old track saw system that used a standard circular saw the pivot point of the saw bevel made to cut line go where it wanted to and it wasn’t at the anti-chip.
I then used some of my other toys to assemble the cabinet boxes. I used a combination of wood screws, Kreg screws, and Dominos.
There is going to be a taller cabinet next to the left but need to see how everything fits before I glue it up.
View attachment 4
View attachment 2
View attachment 3
