CT-Mini - can't find where to mount the terminal block

[chriscurnow]

I took my CT-Mini apart a few weeks ago because it stopped working. I'm not sure what was wrong because when I hooked everything up again (without putting back together - just hooked up all the wiring), it worked fine.

Anyway, I gave it a good clean out and put it back together. Or nearly back together. Everything is fine except for the mains terminal block - i.e. where the main power cable comes in there is a terminal block with spade terminals and screw connections for the main cable.

Problem is I can't for the life of me work out where the terminal block goes. I know there was a screw holding it in and I have that screw. But I can't see anywhere for the screw to screw into.

Can anyone help me out here? It must be really obvious but I am missing it.

 

[AlexThePalex]

I remember running into the same dilemma when I repaired my Mini. Luckily it's in my routine to take pictures when opening up equipment.

[attachimg=1]

 

[Brice Burrell]

I remember running into the same dilemma when I repaired my Mini. Luckily it's in my routine to take pictures when opening up equipment.

Since pretty much everyone carries a phone with a camera in their pocket there is no excuse not to take pictures as routine.

 

[chriscurnow]

I remember running into the same dilemma when I repaired my Mini. Luckily it's in my routine to take pictures when opening up equipment.

Since pretty much everyone carries a phone with a camera in their pocket there is no excuse not to take pictures as routine.

Thanks so much. That's just what I need.

FWIW, I did take lots of pics but somehow missed that one

Thanks again.

 

[Misteryez]

That is cool there is a Mercedes capicator in lower right. Now I know why festool is so expensive.