CT26

[illumicon1]

While running cope and sticks on about 30 cabinet door frames through my CMS-VL mounted with an OF1400 and hooked up to my 6 month old CT26, I noticed or could hear the vacuum powering up and down but it wasnt affecting the router. Any thoughts?

Scott G.

 

[adugas]

sorry for stating the obvious but is the bag full?

i remember when i got my and used for the first time i packed the bag to much

 

[Samo]

The Vac was varying the suction power on it's own?

Sounds like a faulty circuit board in the 26. 

I would be on the phone with Festool first thing Monday.

 

[illumicon1]

sorry for stating the obvious but is the bag full?

i remember when i got my and used for the first time i packed the bag to much

No. I had just changed it.

 

[illumicon1]

sorry for stating the obvious but is the bag full?

i remember when i got my and used for the first time i packed the bag to much

No. I had just changed it.

That's what I was afraid of.

 

[illumicon1]

The Vac was varying the suction power on it's own?

Sounds like a faulty circuit board in the 26. 

I would be on the phone with Festool first thing Monday.

oops.... wrong quote. I was afraid of something to do with the circuit board.

 

[Samo]

Yeah, hopefully not.  Maybe something simple but at least the repair service is good.

 

[illumicon1]

Granted the vac had been running for nearly an hour straight while I was running all the cope and sticks.

Scott G.

 

[Laminator]

I've noticed mine stopping while sanding a few times.  Its very random and has always started back up when I restart the sander.

 

[carlb40]

As the Festool vacs are LVHP types, in my workshop i have a wall mounted LVHP extractor  and it needs a 15 minute rest every 3 hours of continuous use. I wonder if something similar applies to the Festool vacs?