DF 700 trim and cross stop

[cfullen]

I plan to take advantage of the 10% savings and get a DF 700.  I already own the DF 500 with the trim and cross stop.  Do these work on the 700? 

I would like to save the additional coin if it is the same accessory. 

Any help would be awesome. 

Thanks,

 

[tbellemare]

The Cross Stops may be interchangeable, depending on how old your DF 500 is...

The current version of the Cross Stops, which is interchangeable between machines is marked on the end where the pin protrudes. One side says "DF500" and the opposite side says "DF700". If you have those markings, it is interchangeable. You simply flip the barrel over when you change machines. The pin is offset from center because the two machines are configured differently.

Tom