Birdhunter
Member
- Joined
- Jun 16, 2012
- Messages
- 4,146
I was installing the 500 connectors in 3/4” Baltic birch. I had the Domino 500 fence set at 10mm. I drilled out the 28mm mortise, attached the drill guide, and drilled the hole using the supplied drill bit and the same reference surface.
The drill came very close to broaching through the underside of the plywood!
I learned to drill the hole using the side opposite from the reference side. That way, there is more wood under the drill bit.
The drill came very close to broaching through the underside of the plywood!
I learned to drill the hole using the side opposite from the reference side. That way, there is more wood under the drill bit.