Gene Davis
Member
- Joined
- Jan 19, 2008
- Messages
- 95
I don't own a Domino yet but am getting ready, designing all the furniture I'll build with it.
The largest tenons available are the 10 x 24 x 50 and I wonder how deep the mortise can be made, if I want to go, say 27 mm deep in one member and only 23 mm in the other. Can I push it to 28 mm deep?
I have a little "tenon crash" going on in my 3D models where aprons join legs, thus my need to know. When doing this with traditional M&T I just bevel the inside edges of the tenons. Hey, maybe I just grind off bevels on the dominos. Say what?
The largest tenons available are the 10 x 24 x 50 and I wonder how deep the mortise can be made, if I want to go, say 27 mm deep in one member and only 23 mm in the other. Can I push it to 28 mm deep?
I have a little "tenon crash" going on in my 3D models where aprons join legs, thus my need to know. When doing this with traditional M&T I just bevel the inside edges of the tenons. Hey, maybe I just grind off bevels on the dominos. Say what?