Domino Connector SV-SYS (700) set question

[James Biddle]

I bought this set from Tool Nut when it first came out and today opened the plastic to use it for the first time.  After going through everything, I found that I was a missing the wrench for the set.  Was it supposed to be included?

 

[Birdhunter]

I bought 8 corner connectors from an eBay seller. No wrench was included, but I used an Allen wrench to get the tightening started and then switched to one of my existing wrenches to do the final tightening. If you need the wrench size, I can look it up.

I checked the Festool USA site and their description of the set mentions a wrench.

I’d call Festool and clarify the situation.

 

[Gregor]

You need a 10mm hex wrench (or nut and a ratchet).

My guess is that it isn't included as one of these is available in basically every household that has a toolbox, here in germany.

 

[neeleman]

I assume you have the complete SV-SYS D14 systainer.
There should be a 4 mm hex key hidden in the foam lid.
At least it was in mine.
[attachimg=1]

 

[sancho57]

I wonder if my domino 500 set has the Alan wrench hidden in the foam. I have mines for about 5 years and never noticed if I it had one or not.

Ill have to check that

 

[James Biddle]

You need a 10mm hex wrench (or nut and a ratchet).

My guess is that it isn't included as one of these is available in basically every household that has a toolbox, here in germany.

I was posting more for Festool to remove it from their included items rather than needing a 10mm wrench.

 

[Gregor]

Oh, with wrench (which is ambiguous) you refered to the allen key.
That one should be somewhere in there, at least in mine it was.