Donkey's ear shooting board styles

[ear3]

I was going to make a donkey's ear assembly for shooting carcasses miters -- I'm planning on making some small drawers for a hand tool cabinet I'm designing and so figure the thin pieces would be best prepared this way.

I see that there are two basic styles: one where the plane sits on its side, and the material is presented at 45 degrees to the blade; the other where the material lies flat and the track for the plane is angled at 45 degrees.  I was wondering what people prefer?  I don't have a dedicated shooting plane, and so would likely build it for my LA jack, since there will be a lot of end grain shooting.

 

[derekcohen]

Hi Edward

This is the one I built and use ...

Front and rear ...

In use ...

Regards from Perth

Derek

 

[rljatl]

Wow, Derek!  I would love to see more of your work, please.  [big grin]

 

[ear3]

Thanks [member=4358]derekcohen[/member] -- beautiful as well as functional.  Is the donkey's ear ramp secured in any way, or do you just butt it up against the fence of the flat shooting board and hold it tight?

 

[Holmz]

[member=4358]derekcohen[/member] what plane is that called?
[member=28483]iamnothim[/member] also had some shooting board, but I am seeing this as solving a 45 degree mitre having a gap.

 

[iamnothim]

That is a Lie Lielsen No. 51 Shoot Board Plane and it is magnificent!
And what a beautiful Shooting board to use with it
Lie Nielsen No 51

 

[iamnothim]

[member=4358]derekcohen[/member]
What species did you use to make your shooting board. 
I can sense that your post just enticed me into a 51' of my own. 
I'll just have to use my no.5 jack plane for ...."jack planing"

My board is very pedestrian Except I put Delrin strips down for gliding

Yours is exceptional and should be in Fine Woodworking

 

[Holmz]

....
My board is very pedestrian Except I put Delrin strips down for gliding
...

Well it made the most memorable impression on me of the day.

Pedestrian or not, your board and the Donkey's ear, are headed in the right direction on the animal compared to my JA approach. Which is something between Mr. Ed and Francis

 

[derekcohen]

Thanks [member=4358]derekcohen[/member] -- beautiful as well as functional.  Is the donkey's ear ramp secured in any way, or do you just butt it up against the fence of the flat shooting board and hold it tight?

I have built many shooting boards over the years. Some were simply because I was ironing out design features, and some because they were for sale (I generally do not sell the tools and furniture I build - this is just a hobby). The point is, the design evolved, and settled on a pivoting front fence. The fence has micro-adjustability built into it. All other fences are attached to this fence - which gives them micro-adjustability as well.

Below is an example of this for a board I built with a mitre fence and a donkey's ear as add-ons. The bolt on the fence connects either accessory.

Link: http://www.inthewoodshop.com/ShopMadeTools/ShootingforPerfection.html

Regards from Perth

Derek

 

[derekcohen]

That is a Lie Lielsen No. 51 Shoot Board Plane and it is magnificent!
And what a beautiful Shooting board to use with it
Lie Nielsen No 51

Thank you. As I mentioned above, I have designed and built many shooting boards over the years. These have been copied by others. The original Super Chute by Tico Vogt was based on one of my boards. He has since altered his fixtures, but the basic design remans.

Here is a general article I wrote many years back:http://www.inthewoodshop.com/ShopMadeTools/Setting Up and Using a Shooting Board4.html

This article has an earlier design but details the micro-adjustable fence: http://www.inthewoodshop.com/ShopMadeTools/Advances in a ramped shooting board.html

The side fence on shooting boards is a significant aid, and a must if using a #51 type plane. The original shooting board with this feature was the Stanley #52. I began posting about it several years ago. Many now incorporate it into their boards: http://www.inthewoodshop.com/ShopMadeTools/RunningFencefortheShootingBoard.html

More later.

Regards from Perth

Derek

 

[derekcohen]

[member=4358]derekcohen[/member]
What species did you use to make your shooting board. 
I can sense that your post just enticed me into a 51' of my own. 
I'll just have to use my no.5 jack plane for ...."jack planing"

My board is very pedestrian Except I put Delrin strips down for gliding

Yours is exceptional and should be in Fine Woodworking

Thanks. The board above was built from Jarrah, which is from Western Australia.

The choice of shooting board design comes down to flat vs ramped. There are pros and cons for each.

Please keep in mind that a shooting board does not have to be fancy to work. Cheap and cheerful is fine ..... however saying this on the FOG does not fly!

A ramped board is best when using a plane with a straight blade, such as a LA Jack. The 5 degree ramp introduces a enough angle to cause the plane to enter the wood progressively as opposed to flat on. This reduces the impact, which increases control when used. I started out using a HNT Gordon Trying Plane, which is a woodie. This benefitted from a ramped board.

A plane with a skewed blade, such as a #51, does not require a ramp as the skew does the work. The skew additionally slices the wood, which the straight blade in a ramped board does not do.

There are three different #51 type shooting planes. I happen to own them all!

The first is the Stanley #51/52 Chute plane and board, which is the King of them all. I was lucky enough to find one cheaply on eBay many years ago (as the frog of the plane was busted), fixed it up and restored it.

Several years later, LN brought out their #51 plane, and my wife purchased this for me for a birthday. it looks right at home here ..

I wrote a review here: http://www.inthewoodshop.com/ToolReviews/LN51ShootingPlane.html

A couple of years went by. I have been fortunate to have been one of the testers of tools for Lee Valley/Veritas for the past decade. I get to test most of the planes, chisels, and some of the saws. Often this goes from early drawings of concepts through to pre-production versions. My involvement with their shooting plane was to use it and determine if it worked in all department before it went to production. This led to my acquiring the Veritas shooting plane ...

The review is here: http://www.inthewoodshop.com/ToolReviews/LVShootingPlane.html

While I love the classic looks of the LN, the Veritas is a much better plane, and its BU configuration blows away the opposition with edge holding. It is the Veritas that lives on my shooting board.

Heh .. with regards Fine Woodworking magazine, I have had some of my tools featured there   This bridle plough plane in Sheoak was one ...

Build it here:http://www.inthewoodshop.com/ShopMadeTools/BridlePloughBuild.html

Regards from Perth

Derek

 

[derekcohen]

Wow, Derek!  I would love to see more of your work, please.  [big grin]

Thanks Rob

There is furniture here: http://www.inthewoodshop.com/Furniture/index.html

.. and tools I built here: http://www.inthewoodshop.com/ShopMadeTools/index.html

Regards from Perth

Derek

 

[iamnothim]

This great news.  I can cancel my subscription to Fine Woodworking and read your articles.
You are the Srinivasa Ramanujan of wood and I'm checking airfare to Perth. 

 

[Holmz]

This great news.  I can cancel my subscription to Fine Woodworking and read your articles.
You are the Srinivasa Ramanujan of wood and I'm checking airfare to Perth.

Mate - just fly here, and then we can go there by car visiting Uluru
(aka Ayres Rock since it is the 25th anniversary of Mabo we will use Uluru. The Paul Kelly song, "from little things big things grow", immortalises it for those who prefer music over history.)

Some other notable WA woods, in addition to Jarrah, are Karri and Tingle. Tasmania has some very nice woods too.

 

[iamnothim]

Hi Derek,

I wonder if there is a specific use for the donkey eared board vs. a flat one.  it seems to me that when you are nibbling away the material down to the apex of the jig you are fighting gravity.  I guess that could be a benefit.  It also seems that the flat design can handle larger stock.

Luke

[member=41125]Edward[/member] A Reno
So sorry for hijacking your thread.  Truly.  But this is very valuable information.

 

[tiralie]

While I love the classic looks of the LN, the Veritas is a much better plane, and its BU configuration blows away the opposition with edge holding. It is the Veritas that lives on my shooting board.

Derek
Thanks for your continuing support and participation on this forum. Very useful first hand knowledge and information.
Tim

 

[Klemm]

[member=43580]RENO[/member]  - thanks Ed for luring Derek out on this thread! - what a treat.
and thank you Derek for sharing your inspiring work involving "cordless" tools  [tongue]

Hans

 

[rustym]

Speaking of Fine Woodworking, there is an article in issue 261 May/June 2017 by Todd Crenshaw "A shooting board for case miters" that may fit the bill.  It seems to make it easier to hold the material that a regular style "donkey ear".

Rusty

 

[tiralie]

I was wondering what people prefer?

I would prefer miter jack but I haven't built one yet. I have a piece of  with a piece of hard maple set at 45 degrees and screwed into 3/4" mdf all mounted to 1/4" ply as a quick and dirty . I did buy a Lion style miter trimmer which I should have used on my last project as I had quite a few miters that could have used some fine tuning.
Tim

 

[LDBecker]

[member=4358]derekcohen[/member]

A couple of years went by. I have been fortunate to have been one of the testers of tools for Lee Valley/Veritas for the past decade. I get to test most of the planes, chisels, and some of the saws. Often this goes from early drawings of concepts through to pre-production versions. My involvement with their shooting plane was to use it and determine if it worked in all department before it went to production. This led to my acquiring the Veritas shooting plane ...

The review is here: http://www.inthewoodshop.com/ToolReviews/LVShootingPlane.html

While I love the classic looks of the LN, the Veritas is a much better plane, and its BU configuration blows away the opposition with edge holding. It is the Veritas that lives on my shooting board.

I found your review of the Veritas Shooting Plane and that was part of what sold me on it. Paring it with a Vogt ramped shooting board and Donkey's Ear...

Thanks for the article - it was well-done and helpful!

Larry Becker