Festool 492525 Ce Self-centering Bit 5mm Outside diameter dimensions

[Martin Johnson]

I was using a Kreg Jig to build a cabinet for my AZ Drawers, and thought I would 3D print my own tool.  Does anyone know the outside dimensions of the self centering 5mm bit?  I will print the holes in my jig to fit...assume it is slightly larger than 5mm

 

[neeleman]

Dimension in millimeters.

 

[Martin Johnson]

Perfect...I will make the hole 8mm, which should be perfect...I might test a couple of variations on either side of 8mm to get it calibrated right.  Thanks for taking the time to post the response...much appreciated