Festool Vac hose holder for systainer

[Tobiasz]

Im looking for combination of those two, the one from photo that will hold hose in place but with possiblity to attach it to sys like the mount from link bellow.
Does any of you saw some free 3d stl file of something like that ?

Also ets ec150 hanging holder for systainer mount could be great.

thanks for all responds

heres link of sys holder mount im talking about

https://allegro.pl/oferta/uchwyt-wieszak-do-skrzyni-systainer-organizer-15435505028

 

[gwendal]

Im looking for combination of those two, the one from photo that will hold hose in place but with possiblity to attach it to sys like the mount from link bellow.
Does any of you saw some free 3d stl file of something like that ?

These hose holder prints on printables are different, but may fit the bill.

Also ets ec150 hanging holder for systainer mount could be great.

There are several prints on printables. Note all these works with TLoc, not Sys3 systainer.

thanks for all responds

heres link of sys holder mount im talking about

https://allegro.pl/oferta/uchwyt-wieszak-do-skrzyni-systainer-organizer-15435505028

 

[Tobiasz]

There are several prints on printables. Note all these works with TLoc, not Sys3 systainer.

Can you point me out why is that ?

 

[gwendal]

Can you point me out why is that ?

Not only the side pockets for the labels have been removed, but the pockets now have a lip that prevent sliding accessories from the top.

 

[onocoffee]

But, if you're thinking about something to hang off your CT, then those printables should work with the CT-VA-20 because that's still built on the T-Loc design.

 

[Hipplewm]

These hose holder prints on printables are different, but may fit the bill.

There are several prints on printables. Note all these works with TLoc, not Sys3 systainer.

I have made one for the sys3 systainer and currently designing one from scratch that will have a hinge so you can open and close the lid and not have to remove it first...

Festool Hose holder Sys3 systainer - Free 3D Print Model - MakerWorld

Download this free 3D print file designed by WMHprinting. This remix adapts the hose holder to the Sys3 Sytainers - with the straight handle - I narrowed it, recontoured the top to fit the sys3, then adjusted the length to fit tight.It works with the 27 and 36mm hoseYou can print 2 - one for...

makerworld.com

 

[onocoffee]

I have made one for the sys3 systainer and currently designing one from scratch that will have a hinge so you can open and close the lid and not have to remove it first...

Festool Hose holder Sys3 systainer - Free 3D Print Model - MakerWorld

Download this free 3D print file designed by WMHprinting. This remix adapts the hose holder to the Sys3 Sytainers - with the straight handle - I narrowed it, recontoured the top to fit the sys3, then adjusted the length to fit tight.It works with the 27 and 36mm hoseYou can print 2 - one for...

makerworld.com

I'm printing it now. Thanks for the file. I've been in need of a hanger for the back side of the Systainer for the CT. The T-Loc version doesn't allow you to stack anything on top of it - and I like keeping the TopRock on the CT. This should be very useful!