Fit of the dominoes

[jacko9]

[member=8318]jacko9[/member] might I ask you some close up photos of the joints you have made? Just to get some encouragement.    [embarassed]

I have one paint grade project going on where I probably try the through tenons,  flush sawn.  How ever the joint will end up,  I will over paint them...

I'll try to get some pictures other through tenon joints but, here is one in black walnut with maple wedges.  The mirror has a through extended tenon cut with a hand saw.  The mortise was cut with my Domino xl 700.  I just finished an oak desk where I used sipo tenons for a through tenon joint showing off the contrast however it's an L- shaped desk and the area where I installed it the joint is not visable (I should have taken a picture)

Make sample joints with scrap to get the look you want - it relieves the stress of screwing up your major project.