FS: Granat sampler for RO90

[nanook]

Inspired by this thread here: http://festoolownersgroup.com/classifieds/fs-granat-sampler-for-ets150ro150/, and frustrated by the lack of sampler sets from Festool.  
I thought I would offer my own Granat sampler packs for the RO90.

10 sheets of each (Granat) - 40, 80, 120, 180, 240, 320, 400 in 90mm Circular.  -- $50

10 sheets of each (Granat) - 40, 80, 120, 180, 240, 320, 400 in Delta for the RO90.  -- $46

Thats 70 sheets total in each set, either delta and circular for the RO90.  
Postage in the CONUS should be $9 via letter mail for up to about 200 sheets.

If you want additional sheets in either the circular or the delta, just let me know, but for the time being it must be as a set in circular or delta of an even quantity of each of the 7 grits.

I have paypal, which should work well for this

 

[nanook]

Just a quick note, but in response to some inquiry on shipping here is what I'm seeing:

Shipping looks like $8.60 via Canada Post letter mail (least expensive option) to the US - 2 complete sets of 90 and delta pads should come in at 8-10oz, well under the 1lb weight limit, unfortunately there is no tracking or insurance on letter mail.  
With tracking and $100 insurance the cost comes up to $20.50 for a 2lb-ish package to the US, or $16.50-ish w/o insurance or tracking.   Sent as letter mail there is no insurance or tracking on the package.
Within Canada $5 should cover letter mail, or $16 will cover an insured small package sent from the east to the west coast.

Obviously these are somewhat rough numbers, and I need to take a quick look at what the couriers are offering.   However $8-10 w/i NA seems to be a fair estimate for one to three sets of delta and 90mm pads.
So looks like $8-10 will cover shipping for most orders w/i NA of between 70 and 210 sheets total.  It may be possible to ship up to 280 sheets at that price-point, however its hard to tell until I get to the post office.

 

[nanook]

Quick FYI - I plan to get these out over the weekend or early next week.  

Still have a few left, but the few sets that are left are going quickly!

Tues July 9th:
For those of you in on the first batch, your sandpaper sets went into the mail today. 
Cheers

 

[nanook]

I've had quite a bit of interest with folks asking me to bring this back -  If you are interested in buying another set respond w/ your email address and your order/shipping info;  I'll then send you a Paypal invoice for the amount.

Pricing is as above in the OP

Cheers,
nanook

 

[nanook]

Based on some feedback I have switched the sets to sets of 10 in either 90mm disks or delta. 

Cheers,