Good news/Bad news

[Runhard]

Could we see a photo of the space you're talking about? For ideas.

I will try to takes some pics and post them this weekend. I usually use an iPad and have heard it is hard to post pics with one. I will have to look into that

Daniel

 

[Runhard]

Rocky beat me to the suggestion: just put a Systainer under it to boost it up. If the Systainer or Sortainer wouldn't be easily accessible, there's no need to put a Sortainer there.  For the longest time, I had a Sys4 on the CT-22 with the WCR on top; it was the Sys4 from the Installer's Kit if I remember correctly and I wasn't really using it.  You likely have a drill Systainer not being used as I keep my drills out all the time.  Before I had the WCR, there was a 'landing pad' there (which is now under the WCR to allow mounting it easily to the Sortainer) and it sat on a Sys1 for the C-12.

If you are going to sell it, you can at least give some of these ideas a try; it won't change your selling price but might change your mind on selling it.  I love mine and the Sortainer idea that someone suggested here in place of the Sys4 has made it only better.

Good suggestions, but I still would not be able to utilize all of its benefits and would rather sell it and get something else.

Daniel

 

[Bhend18]

Rocky beat me to the suggestion: just put a Systainer under it to boost it up. If the Systainer or Sortainer wouldn't be easily accessible, there's no need to put a Sortainer there.  For the longest time, I had a Sys4 on the CT-22 with the WCR on top; it was the Sys4 from the Installer's Kit if I remember correctly and I wasn't really using it.  You likely have a drill Systainer not being used as I keep my drills out all the time.  Before I had the WCR, there was a 'landing pad' there (which is now under the WCR to allow mounting it easily to the Sortainer) and it sat on a Sys1 for the C-12.

If you are going to sell it, you can at least give some of these ideas a try; it won't change your selling price but might change your mind on selling it.  I love mine and the Sortainer idea that someone suggested here in place of the Sys4 has made it only better.

Could someone link the video where Paul shows this setup? Thanks.

 

[Runhard]

Rocky beat me to the suggestion: just put a Systainer under it to boost it up. If the Systainer or Sortainer wouldn't be easily accessible, there's no need to put a Sortainer there.  For the longest time, I had a Sys4 on the CT-22 with the WCR on top; it was the Sys4 from the Installer's Kit if I remember correctly and I wasn't really using it.  You likely have a drill Systainer not being used as I keep my drills out all the time.  Before I had the WCR, there was a 'landing pad' there (which is now under the WCR to allow mounting it easily to the Sortainer) and it sat on a Sys1 for the C-12.

If you are going to sell it, you can at least give some of these ideas a try; it won't change your selling price but might change your mind on selling it.  I love mine and the Sortainer idea that someone suggested here in place of the Sys4 has made it only better.

Could someone link the video where Paul shows this setup? Thanks.

 

[copcarcollector]

 

[sancho57]

It's too bad that I just purchased one a few weeks ago. Why is it not working for?  Just curious?

Bob

Bob,

I have a CT26 with a boom arm set up behind my MFT/3. The WCR-1000 doesn't raise high enough and I would loose the use of the tool holder on the boom arm. My shop is in my basement and I do not have much room. I do not move my CT26 around, if I did the WCR may be more useful, but still low. I have a midi hooked to my Kapex that I move around if I need too.

Daniel

Daniel,
You could aways build a mobile stand simular to the festool MFH 1000 which the WCR1000 would mount to. Im considering building one. Anyway, it will allow you to keep the WCR. It is a kewl little do-hicky

I may just try that. I could build a mobile sysport the hight that I want with the WCR on top. As it is now. My CT26 is not mobile. The only down side is that my shop is so small, so I wouldn't need to move it  [tongue] I think a metal peg board wall unit will be what I end up with.

My Work center is  so loaded down with stuff that it makes moving the CT26 around difficult/ heavy etc.  I like the idea of tools following me around, saves me a step or 2. So I'll build a mobile work stand ( Heck I might ust buy it) . It will make it easier to move the CT around and changing bags ect

 

[Runhard]

I have the unit up for sale in the classifieds for $350, is that too high? I did not even attach any of the attachments to it. It is still pretty much brand new.

Daniel

 

[Brice Burrell]

Well you can always lower it it need be.  It's a shame it didn't work out since the workcenter is a fabulous tool solution.....