Is a dedicated mini enough for the kapex??

[lawhoo]

I have a dedicated mini sitting under my Kapex  table with a 36mm hose, i made round holes through the bench top and inner shelf for the cables and hose to pass through.
This way the 36mm hose enters the mini straight from above without needing an elbow, and without coming out the front of the bench and sitting in the way.
DC is excellent with the 36mm, poor with the 27mm. I may grab a pic later.

Tim,

Is your mini one of the newer ones, with a higher (137) cfm rating?

 

[Laminator]

I use my mini with my kapex with about a 5' length of 36mm  AS hose.  The mini sits on the floor at the back of my portable work table and the hose comes straight up to the kapex.  Used this way, there is no hose binding or snagging as it stays completely in the air the whole way.  Dust collection is excellent.

 

[Timtool]

Tim,

Is your mini one of the newer ones, with a higher (137) cfm rating?

It's only 3-4 months old, it has the same rating as the bigger models.