Woodchippie
Member
- Joined
- Mar 27, 2014
- Messages
- 171
Had a spare day last week, and weather been good lately, so I thought get the floor in my Ford transit sorted.
Ive had some thick flooring tiles for a while now, thought they would be perfect. I was going to cut them with a Stanley Knife but there far to thick, so i used the saw table and jigsaw.
I took out the racking and cleaned it up,then slid it back in. Its screwed down and cable tied to the side rail.
I don't carry all my Festool equipment, it depends on the job.
It has spurred me on a bit, the next job will be to insulate roof and cover with 6mm plywood, and add some LED lights ready for the winter and those dark nights trying to load van.
Ive had some thick flooring tiles for a while now, thought they would be perfect. I was going to cut them with a Stanley Knife but there far to thick, so i used the saw table and jigsaw.
I took out the racking and cleaned it up,then slid it back in. Its screwed down and cable tied to the side rail.
I don't carry all my Festool equipment, it depends on the job.
It has spurred me on a bit, the next job will be to insulate roof and cover with 6mm plywood, and add some LED lights ready for the winter and those dark nights trying to load van.