i have recently purchased a Kapex 120 and i am having problems sourcing a suitable fitting large enough to fit over the Kapex dust port . My dustnport has "cleantec" embossed on it and is nominally 40mm in Diameter however there are some nibs which are some give some kind of bayonet fitting which increase the Diameter to about 44 mm. I want to use a 36mm hose as recommended and fit it over the outlet not inside Does anyone have the part nos or source of tbe vacuum hose fitting i only need the fitting i have loads of 36mm hose. Thanks in advance
Kapex 120 dust outlet
- Thread starter Peter ing
- Start date
- Joined
- Jun 24, 2007
- Messages
- 10,355
Hi,
This is the fitting you need. Fits over the Kapex port. Like all the new Festool connections it is pushed on then turned to lock into the nibs. Not sure what brand hose you have so it may or may not fit the hose.
https://www.festoolusa.com/accessor...ecting-sleeves/500670---d-36-dm-asct#Overview
Seth
This is the fitting you need. Fits over the Kapex port. Like all the new Festool connections it is pushed on then turned to lock into the nibs. Not sure what brand hose you have so it may or may not fit the hose.
https://www.festoolusa.com/accessor...ecting-sleeves/500670---d-36-dm-asct#Overview
Seth
Similar threads
