Toolpig
Member
- Joined
- Jan 25, 2007
- Messages
- 399
I'm using my KAPEX with a CT22 dust collector and the larger 36mm hose. The dust collection with this setup is decent, but hardly perfect.
I'm wondering if it might be better connected to my 1-1/2HP Delta dust collector with a 4-5" diameter hose and 1-micron bag. I imagine I'll lose some of the benefit of the larger hose in reducing down to fit the small DC port on the KAPEX (increased static pressure, loss in CFM, etc).
Anybody try something like this? If so, is there a noticeable difference in chip collection versus the CT22 (or similar) unit?
Jason
I'm wondering if it might be better connected to my 1-1/2HP Delta dust collector with a 4-5" diameter hose and 1-micron bag. I imagine I'll lose some of the benefit of the larger hose in reducing down to fit the small DC port on the KAPEX (increased static pressure, loss in CFM, etc).
Anybody try something like this? If so, is there a noticeable difference in chip collection versus the CT22 (or similar) unit?
Jason