Kapex Stand

[Neathawk Designs]

I don't post here much, but I was pretty excited when I came up with this this morning (So much so that I decided to make it and be late for work!)

I really wanted a stand ASAP but wasn't quite sure what I wanted, so I made this this morning

The stand doubles as a work spot with the extensions on the stand as well... OR you can remove it and set it on the ground if you need to make cuts on the ground.  I still need to cut the bolts flush (actually counter sink).  I carved it out on my CNC machine so the clamps and other accessories fit great.

 

[Neathawk Designs]

I uploaded the video of making the stand to Youtube (It's still uploading so it might be a minute). 

CNC Milling MFT Saw Top

I think we are going to also make wings out of MDO complete with the holes in it for clamping along with a T Track so we can mount a stop.  This way we will have a sacrificial cutting board to use as well - and clamping space for when we might want to clamp down something to sand or to cut with the jig saw.