Leveraged my festool clamps from MFT/3 for my CNC table

[bonesbr549]

Completed updating my CNC table.    I wanted a hold down method.  I'd used screws to attach to spoilboard.  I'd used paiters tape and supper glue.  I also considered installing T-track. 

Then it dawned on me why not leverage the festool way and leverage my MFT/3 clamps.    So, I did a quick cam file of 20mm holes by 17mm deep on 96mm centers.    Here is the result.  Works great.   

[attachimg=1]