Looking for a rail and stile set

[mastercabman]

I am looking for a set of rail and stile router bits.
It looks like a round over with a bead at top and bottom but it is more of a elongated round over.I was told that it is a thumbnail or table top profile.
Does anyone knows if there is such a router set?  I think that the only way to get that profile is with a shaper cutter.

 

[BarBuilder]

Looks like an Ogee profile to me

 

[mastercabman]

It's not an ogee.It is just round.Also i forgot to mention that it is about 9/16 wide profile(from the top bead to the edge of the bottom bead)

 

[tbellemare]

Is this it?

Tom

 

[BarBuilder]

Looks a lot like profile "C" in Tom's post

 

[mastercabman]

I don't think that is.If you look at my picture you will notice that the round over is longer than the height.
The one showing(C) is a round over with bead at the bottom.The round over that i'm looking for is what some calls it "thumbnail"or "table top" profile.
Again i don't think i'm going to find in a router bit.Most likely shaper cutter.And maybe special order?

 

[BarBuilder]

Well a quick internet search offers many thumbnail and table edge bit/cutter options but none of which are stile & rail sets, sorry.

http://www.librawood.com/thumbnailtableedgebit.aspx

http://www.librawood.com/tableedgebits.aspx

 

[mastercabman]

Well a quick internet search offers many thumbnail and table edge bit/cutter options but none of which are stile & rail sets, sorry.

http://www.librawood.com/thumbnailtableedgebit.aspx

http://www.librawood.com/tableedgebits.aspx

Yep,same here.I found a few like that but no set.

 

[Deansocial]

i found some which are flat sash ovalo from a uk firm, can post the link if you like

 

[mastercabman]

i found some which are flat sash ovalo from a uk firm, can post the link if you like

Yes please do.

 

[Deansocial]

http://www.wealdentool.com/acatalog/Online_Catalogue_Flat_Sash_Ovolo_set_650.html

 

[mastercabman]

Thank Dean,looks very close to what i'm looking for.I'm going to search for sash router bit and see if i can get some like it.

 

[mouppe]

http://www.leevalley.com/US/wood/page.aspx?p=30122&cat=1,46168,62157&ap=1

 

[tiralie]

Hard to tell until you get it in your hands, but does this look like it...
http://www.leevalley.com/US/wood/page.aspx?p=46235&cat=1,46168,46178

 

[mastercabman]

Richard,Tim, no that's not it.If you look at Dean link that he posted,you will notice how the round over is longer than the height and with a bead/fillet at the bottom.
Richard you are close but not quite there.

 

[tbellemare]

If you look closely at profile C on this page, you'll note that the horizontal part of the round extends beyond the round into a horizontal flat. If you pick on the image, it will enlarge.

Tom

EDIT: Never mind, I just looked more closely at yours and it isn't a flat but the round is just positioned differently.