Looking for a shaker style bit set with these approx dimensions

[Goldserve]

From a draft of the profile I made, you can see the important bits are the groove at ~0.22" x 0.5", the radius is measured to be around 3/32". The shaker style angle should be 15 degrees per norm but my trace came out to be around 12.5 degrees so I don't believe this too much.

I am having trouble locating any shaker style bit set with the 3/32" radius.

Any help?

[attachimg=1]

 

[Packard]

You can easily add the radius after cutting the pieces with a round over bit.  The really small radius bits use solid carbide guides (no separate bearings).  It is a extra step, but it would go quickly.  Whiteside makes a 1/16” and a 1/8”, but no 3/32nd inch.  So your search will continue.

I add that radius, but not to the joint areas.  I clamp the rails and stiles and add the radius while it is clamped.  You can’t do that with the router mounted in the router table.

 

[Goldserve]

I'm cutting down some existing cabinets I have so i'm trying to salvage as much of the existing door and use the old wood to get a rail from it. I thought it would be easy but when I look at the profile, I see this rounded radius!