I was going to write up a short review of this new right angle die grinder from Milwaukee but after using it yesterday and today to de-burr and clean up some mild steel, I’m just going to say that if you work with metal in any of your process just buy one.
https://www.milwaukeetool.com/Products/Power-Tools/Material-Removal/Angle-Grinders/2485-20
It’s generally available from most Milwaukee dealers online. right [member=48572]Shane Holland[/member]
It has four speeds from 10,000 to 24500 rpms. Has a 1/4 inch chuck and takes all the M12 batteries although a higher capacity one is better like 4.0 or 6.0
Paired with 2 inch rolocs it is a joy to use. Light, one handed operation and good control over working with a bigger angle grinder.
Quiet compared to a regular grinder and doesn’t have that annoying dentist drill whine like most air powered die grinders.
Ron
https://www.milwaukeetool.com/Products/Power-Tools/Material-Removal/Angle-Grinders/2485-20
It’s generally available from most Milwaukee dealers online. right [member=48572]Shane Holland[/member]
It has four speeds from 10,000 to 24500 rpms. Has a 1/4 inch chuck and takes all the M12 batteries although a higher capacity one is better like 4.0 or 6.0
Paired with 2 inch rolocs it is a joy to use. Light, one handed operation and good control over working with a bigger angle grinder.
Quiet compared to a regular grinder and doesn’t have that annoying dentist drill whine like most air powered die grinders.
Ron
