A aptpupil Member Joined May 21, 2013 Messages 65 May 21, 2013 #1 Was inspired by a couple threads on here, so here's my version. Hopefully the attachments display correctly... EDIT> added spaces between pictures
Was inspired by a couple threads on here, so here's my version. Hopefully the attachments display correctly... EDIT> added spaces between pictures
A aptpupil Member Joined May 21, 2013 Messages 65 May 21, 2013 #3 Thanks. I used 1/2" ply all around except for the handle which is 3/4" ply. All of it was made from scraps, including the SS drawer bottoms. I pinned the tool dividers into place so I could easily move them if their location didn't suit me.
Thanks. I used 1/2" ply all around except for the handle which is 3/4" ply. All of it was made from scraps, including the SS drawer bottoms. I pinned the tool dividers into place so I could easily move them if their location didn't suit me.
semenza Festool Moderator Festool Moderator Joined Jun 24, 2007 Messages 10,355 May 21, 2013 #4 Looks good, I like the way you did the tool holders (hammer and such) on the top level. Seth
builderbob Member Joined Feb 17, 2007 Messages 1,374 May 21, 2013 #5 That looks awesome! I bet that's a bit of a heavy Sys 4!
A aptpupil Member Joined May 21, 2013 Messages 65 May 21, 2013 #6 Not too bad right now, but it's not fully loaded. My 6 and 12 drawer sortainers on the other hand...
