NEW! Bluetooth Remote, New Accessories, New Abrasives + New MX 1200 Mixer (US)

[Dick Mahany]

[member=59951]Dick Mahany[/member]
Sure I’ll snap some tonight and post them in a new thread so we can put an end to this hijack that I started, lol.

Looking forward to a new thread.  You may have started the unintended hijack, but I certainly help the cause [big grin]. 

 

[Shane Holland]

FOG Friends,

Only a week remains before the new Festool gear starts shipping. Just a friendly reminder for anyone that's considering ordering any of it.

I was thinking... the Bluetooth remote should almost be a no-brainer for anyone with a Planex. I could see where that application really stands to benefit.

Check out the new video from our resident expert, Mr. Parfitt, showing the new Bluetooth module.

 

[Shane Holland]

All, the new Festool items start shipping on Monday. We have them in stock and ready to ship.

Please note that a couple of the new braided sleeve hoses and the Bluetooth batteries have already been backordered by Festool.

Shop New Festool

8147

 

[ben_r_]

AWESOME! Cant want to get my Bluetooth remote kit!

 

[Shane Holland]

In case you didn't make it to JLC NE, here's a video showing the new Festool coming next week.

 

[peter halle]

And from the Sedge:

https://instagram.com/p/Bg9fU5ZnAh0/

Peter

 

[Shane Holland]

Today's the day! The new additions to Festool's line up are now shipping from The Tool Nut. Check out the beginning of this post if you need to get up to speed on what's now available.

Shop New Festool

8756

 

[ben_r_]

Today's the day! The new additions to Festool's line up are now shipping from The Tool Nut. Check out the beginning of this post if you need to get up to speed on what's now available.

Shop New Festool

8756

YES! Cant wait to install my new Bluetooth remote!

 

[Michael Kellough]

Hope someone breaks down the Domino connector kit contents and coordinates with orderable parts so we can figure out what all those little pieces actually are.

 

[Cheese]

Hope someone breaks down the Domino connector kit contents and coordinates with orderable parts so we can figure out what all those little pieces actually are.

Hey Michael, this is the best effort I've seen thus far.
https://www.google.com/url?sa=t&rct...no_kvmsv.pdf&usg=AOvVaw34yhH40JWavWuNE6rSDt_w

 

[Shane Holland]

[member=297]Michael Kellough[/member], see if this helps simply it a bit.

[attachimg=1]

[attachimg=2]

[attachimg=3]

[attachimg=4]

 

[Michael Kellough]

Thanks [member=44099]Cheese[/member] and [member=6555]Shane[/member] .

Festool’s graphics department did a great job on those illustrations and photos!

What I still want to see is coordination of the “KV...” designations in the brochure and the product numbers accompanying the photos.

The photo of the Systainer full of pieces doesn’t help because the “KV’s” etc. are disassembled into sub-parts. It’s nice that different “KV’s” share common parts but it’s difficult to know what’s really in the kit.

 

[Shane Holland]

[member=297]Michael Kellough[/member], sorry for the delay getting back to you on this. Here's a view of the contents of the Domino 500 Connector Systainer. Does that show what you're looking for better? Combined with the manual, I hope this helps. Not really a one-to-one relationship between the "KV"s and SKUs, but this may be a better illustration of what you're getting with the kit.

• (70) Domino/Domino KV D8 basic structure connector
• (20) Domino/LR32 KV-LR32 D8 basic structure connector
• (10) Domino/Domino MSV D8 center panel connector
• (10) Domino/LR32 MSV-LR32 D8 center panel connector
• (50) Dark brown cover caps
• (50) Silver cover caps
• (50) White cover caps
• (50) Grey cover caps
• (20) Domino D 8 x 36 mm
• (1) BS-KV D15 drill template, 203164
• (1) KVB-HW D15 CE hinge location cutter, 203165
• (1) Screwdriver
• (1) Systainer SYS 1 T-LOC

[attachimg=1]

9490

 

[Michael Kellough]

Thanks Shane, that does help a lot.

 

[promark747]

[member=297]Michael Kellough[/member], sorry for the delay getting back to you on this. Here's a view of the contents of the Domino 500 Connector Systainer. Does that show what you're looking for better? Combined with the manual, I hope this helps. Not really a one-to-one relationship between the "KV"s and SKUs, but this may be a better illustration of what you're getting with the kit.

• (70) Domino/Domino KV D8 basic structure connector
• (20) Domino/LR32 KV-LR32 D8 basic structure connector
• (10) Domino/Domino MSV D8 center panel connector
• (10) Domino/LR32 MSV-LR32 D8 center panel connector
• (50) Dark brown cover caps
• (50) Silver cover caps
• (50) White cover caps
• (50) Grey cover caps
• (20) Domino D 8 x 36 mm
• (1) BS-KV D15 drill template, 203164
• (1) KVB-HW D15 CE hinge location cutter, 203165
• (1) Screwdriver
• (1) Systainer SYS 1 T-LOC

[attachimg=1]

9490

Any idea what that plastic piece is for in back near the hinge of the systainer? (Behind the three containers.)  It appears to have slots to connect other bins but would seem unnecessary if one is using the three containers provided.

 

[Shane Holland]

Any idea what that plastic piece is for in back near the hinge of the systainer? (Behind the three containers.)  It appears to have slots to connect other bins but would seem unnecessary if one is using the three containers provided.

[member=7714]promark747[/member]

Check out this thread:http://festoolownersgroup.com/festool-how-to/what-are-these-for-50758

 

[promark747]

Thanks Shane