New tools being released in the fall

[JG]

Video shows new tools and accessories being released in the fall. Not sure if being released in NA as well.

 

[JG]

Link for video did not post but video is entitled

New Products Fall 2021 with Nadja & Georg (Recording of the live session...

 

[Cheese]

=2

 

[AlexThePalex]

=2s

 

[Jason.L.Hagen]

I wonder if they will release this stuff in the US.

Sent from my iPhone using Tapatalk

 

[Coen]

28 minutes !? darn. Truly the new YouTube where information density approaches zero.

Let's conclude;
0 - 1 minutes; skip (1)
1 - 2 minutes; new rail with Systainer-handle hole
2 - 3 minutes; ^ in two sizes!
3 - 4 minutes; rail has more holes for sticky pads
4 - 5 minutes; demonstration of sticky pads
5 - 6 minutes; actually using the rail with sticky pads and track saw
6 - 7 minutes; "the sticky pads are awesome"
7 - 8 minutes; more holes in the rail; for screws
8 - 9 minutes; "system around the guiderails"
9 - 10 minutes; the new adjustable angle stop
10 - 11 minutes; live demonstration of said angle stop (you can clamp it!)
11 - 12 minutes; angle stop has extensions for sheets with non-flat sides
12 - 13 minutes; "
13 - 14 minutes; 'parallel' side extension also available
14 - 15 minutes; "
15 - 16 minutes; THE NEW RAIL CONNECTORS!!!!! (Also: seems Festool is into cutting guiderails into custom lengts too!)
16 - 17 minutes; demonstration of new connectors
17 - 18 minutes; "
18 - 19 minutes; The new hose/cable deflector
19 - 20 minutes; 'lets walk a few meters to the new OF1010'
20 - 21 minutes; New OF1010 has new round bajonet dust extractor connection, fits D36 hose too
21 - 22 minutes; New OF1010 has clamps on both columns when you fix the depth
22 - 23 minutes; New OF1010 has moved columns... giving better access to the bit
23 - 24 minutes; ^demonstration of..
24 - 25 minutes; skip... while they use the router to make a tiny 10mm groove
25 - 26 minutes; skip...
26 - 27 minutes; skip...
27 - 28 minutes; skip... but visit the Festool website

I hate to break it... but Bosch' video was better. For one because it had a nice list of the contents in the description with direct time-stamp links.

 

[AlexThePalex]

Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

 

[ChuckS]

28 minutes !? darn. Truly the new YouTube where information density approaches zero.

Thank you for the list...! It saved me from watching the video as nothing there was of interest to me.

 

[Coen]

Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;

With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)

 

[Jason.L.Hagen]

Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;

With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)

Why can’t they include the quick lever clamps! So much faster!

Sent from my iPhone using Tapatalk

 

[zapdafish]

keep waiting for them to clap their hands and say, were gonna pump you up

 

[Coen]

Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

 

[Jason.L.Hagen]

Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

That wasn’t in the video!

Sent from my iPhone using Tapatalk

 

[Picktool]

you mean...

keep waiting for them to clap their hands and say, were gonna pump you up

gah... 34yrs ago

 

[Cheese]

28 minutes !? darn. Truly the new YouTube where information density approaches zero.

I hate to break it... but Bosch' video was better. For one because it had a nice list of the contents in the description with direct time-stamp links.

Ya, this Festool video is painful to watch in its entirety.

The neat thing about the rail sticky inserts is that they're a tiny bit longer than the slot so when you insert them, the insert cups slightly and prevents the adhesive from touching the wood. You can slide the rail into position and when it's where you want it, you push down the sticky inserts and they then adhere to the wood.

 

[Coen]

Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

That wasn’t in the video!

Sent from my iPhone using Tapatalk

True, that too wasn't in the video  [wink]

 

[usernumber1]

i watched it at 2x playback speed. it was still awkward and too long

 

[elfick]

Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;

With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)

This set should have included the FS-Rapid Clamp (489790) to make it truly guide rail focused.

 

[Jason.L.Hagen]

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;

With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)

This looks a lot like this kit 497657. Except no splitter guide and angle gauge is updated.

 

[mcooley]

Are the adhesive inserts for the rail reusable for a number of cuts and if so about how many? I presume they are etc.

Curious about the rail connectors and how much better they keep the joining rails square.

As for the video I agree Festool so often seems to be in the dark when it comes to presenting their products in a more compelling fashion. Not looking for anything flashy but more informative and a contemporary form. This video feels like a US infomercial.