No Kreg, they didn't want bead board...

[rnt80]

I just finished installing this yesterday.  This was largely a customer designed job.  They were very interested in clean lines and nothing too ornate or busy.  About the only things I added to the design were the wood framed glass shelves and the bumped out middle section.

 

[AlexThePalex]

Kewl, no bead board. Too bad they did want those moldings, they're so 18th century. For the rest, nice job

 

[PeterK]

Very nice. Very clean! I like it.
I know it is what the customer wanted but--- TVs keep getting larger!
How are they going to cram a 70" in there?  [eek]

 

[Scott B.]

Russell

Very nice work. The paint job in the first pic looks like a nice satin finish. What is it? Did you do the finish?

 

[rnt80]

Very nice. Very clean! I like it.
I know it is what the customer wanted but--- TVs keep getting larger!
How are they going to cram a 70" in there?   [eek]

Thanks.  It's hard to tell from the pictures but the space is 8' high.  The tv they have in there is a 55" unit so it's pretty big.

 

[rnt80]

Russell

Very nice work. The paint job in the first pic looks like a nice satin finish. What is it? Did you do the finish?

Thanks Scott.  I do all my finishing and over the years that has been a huge learning process.  The paint is SW semi gloss pro classic.  I think I probably need a larger tip for my gun (I use a 1.7)because I have to thin it quite a bit to get it to lay down like I want.  I went over that with a couple of coats of Target's conversion varnish which gives me a final finish that is incredibly smooth.  It's hard to tell from these pics but a couple of the doors are yellowed from the cv.  I'll probably end up having to respray them since I'm not happy with how they look and I couldn't really see it until I had them in place at the customer's residence. 

 

[Scott B.]

Proclassic sprays really nice. Good job. We have been spraying alot of traditional cabinetry like that on site lately.

 

[andvari]

Very nice. Very clean! I like it.
I know it is what the customer wanted but--- TVs keep getting larger!
How are they going to cram a 70" in there?   [eek]

Exactly. My current TV is 70" and I'm sure my next will be yet again bigger.

 

[peter halle]

Russell,

Great job again!  Pretty soon you might have to think about a career change.

Oink!

Peter

 

[Kev]

Nice work - but I hate those knobs and their choice of openings. Something concealed would have worked much better. Customer choice eh? Must be annoying when you have to explain your portfolio of work!

But again - the workmanship looks excellent.

 

[Johncarlo]

Really nice work Russell! The glass shelving and lights are a nice touch.

 

[nydesign]

Nice, it looks really well done.
If you do something like it again I'd suggest using pocket door slides, the doors can tuck into the cabinet and not cover the bookcase when open.
The only downside is you have to give more space for the doors on the sides.

 

[rnt80]

Nice, it looks really well done.
If you do something like it again I'd suggest using pocket door slides, the doors can tuck into the cabinet and not cover the bookcase when open.
The only downside is you have to give more space for the doors on the sides.

We were going to do the pocket doors initially but they opted for bifold.  That middle section is really wide (over five feet)so had they gone with the pocket doors they would have been huge.

 

[NEW2FES]

 New here but WOW some of the comments?? Some constructive help but some just plain rude. When you are working for someone else it takes more talent to make what the customer wants to look good then to force a customer to live with what you feel looks good. Personal taste is personal taste. There is nothing here that is wrong construction or form wise. If the customer wants a 20" Tv so be it. Did you ever think not everyone wants a 70" TV? Did you 1st ask how far the seating position is from the unit? Too big is just as bad as too small.

 The knobs are not hot pink but a simple classic design. The owner has to come home look at it and be happy not make someone hiding behind a keyboard happy. As both a woodworker and customer I would prefer a worker I can trust will implement my designs and not argue with me through the entire process and force what they want on me. Did you ever think that your design or idea would be something someone else would not like? Impossible in your mind I am sure.

I always think why don't the haters post their masterpieces when the reply with a "I hate that" post.

 

[Kev]

 New here but WOW some of the comments?? Some constructive help but some just plain rude. When you are working for someone else it takes more talent to make what the customer wants to look good then to force a customer to live with what you feel looks good. Personal taste is personal taste. There is nothing here that is wrong construction or form wise. If the customer wants a 20" Tv so be it. Did you ever think not everyone wants a 70" TV? Did you 1st ask how far the seating position is from the unit? Too big is just as bad as too small.

 The knobs are not hot pink but a simple classic design. The owner has to come home look at it and be happy not make someone hiding behind a keyboard happy. As both a woodworker and customer I would prefer a worker I can trust will implement my designs and not argue with me through the entire process and force what they want on me. Did you ever think that your design or idea would be something someone else would not like? Impossible in your mind I am sure.

I always think why don't the haters post their masterpieces when the reply with a "I hate that" post.

Calm down - nobody is "hating" anything. Also, sharing opinions and preferences is a much better exchange that parroting compliments for the sake of it. This isn't an emotional support group.

Nobody is forcing anything on anybody. Don't try to find a meaning in a post that just isn't there. Go back and read all of the post VERY carefully and you will notice all posts are complimentary of talent.

 

[sancho57]

Awesome Russell

See there ya go again, give me another reason not to post my work :>D

Hey Kev

I like the knobs…. [big grin]

Dont hate me cuz ya aient me  [tongue]

 

[Kev]

Awesome Russell

See there ya go again, give me another reason not to post my work :>D

Hey Kev

I like the knobs…. [big grin]

Dont hate me cuz ya aient me   [tongue]

ahh - you see, I must be a knobless kinda guy  [eek]

To me though it's probably not the knobs themselves, but because the openings dictate different placements my OCDishness can't look at them.

 

[tiralie]

I think I probably need a larger tip for my gun (I use a 1.7)because I have to thin it quite a bit to get it to lay down like I want.   

What gun/system are you using Ron? The finish (in photo's) looks good.
Tim

 

[rnt80]

No worries on my end. I'll take as much critiquing as you like.  I understand about the knob placement.  I built that lower portion based on the configuration of doors that the customer wanted.  Had it been up to me there's plenty I would've changed with the piece....not my call though.  The customers love it and are happy and in the end that is what is most important to me.

 

[Jonhilgen]

Nice, it looks really well done.
If you do something like it again I'd suggest using pocket door slides, the doors can tuck into the cabinet and not cover the bookcase when open.
The only downside is you have to give more space for the doors on the sides.

We were going to do the pocket doors initially but they opted for bifold.  That middle section is really wide (over five feet)so had they gone with the pocket doors they would have been huge.

Russ, you can use pocket door hardware on bifold doors, but it would eat up quite a bit of space inside the opening.

Great looking project as always.

Edit:  do you use "fillers" when your cabinets butt up against walls?  It looks as though the doors on the base cabinets are right up against the wall (sorry, but looking at pics on my phone so its tough to see)

Jon