noise level of rotex ro 150

[billwenger]

does anyone know the actual, measured decibel level of rotex 150, or typical range of decibel levels? I can't seem to find such data....

 

[sancho57]

huh  what....

 

[ear3]

Certainly much louder than the RO90.

does anyone know the actual, measured decibel level of rotex 150, or typical range of decibel levels? I can't seem to find such data....

 

[Stephen B]

[size=14pt]Page 10 of GB  (Non NA) manual.

[size=18pt]'Sound Pressure Level 82dB
Sound Power Level 93dB
Measuring Uncertainty Allowance 3dB'
[size=14pt]
This Data may be different from North American RO150 models, and I could not find this information in USA website manual.

Australian Festool website does not appear to have a manual for DL. Will check my paper AUST manual later today and post update if data different.

It is my understanding that hearing loss occurs over 80dB?, so wear/use headphones/hearing protection.

[size=10pt]
http://www.manualslib.com/manual/815859/Festool-Rotex-Ro-150-Feq.html?page=4#manual

[size=18pt]
Oh, and welcome to the FOG Billwenger.  [smile]

----------------

Edit
[size=14pt]page 10 of the Australian Manual shows same data. There is also vibration data just below that for dB.

I use Sthill Professional Headphones.

 

[SS Teach]

If you are using it properly it is attached to a CT which makes it louder. Since decibel level is a concern get serious hearing protection, not the stuff sold at the big box store. 

 

[Grasshopper]

Do you have a recommendation on good hearing protection?

I have been using some Dewalt "muffs" that I bought online.

If you are using it properly it is attached to a CT which makes it louder. Since decibel level is a concern get serious hearing protection, not the stuff sold at the big box store.

 

[ear3]

Sensgard:

http://www.amazon.com/SensGard-SG-31-Hearing-Protection-Device/dp/B001IMHSP4

Do you have a recommendation on good hearing protection?

I have been using some Dewalt "muffs" that I bought online.

If you are using it properly it is attached to a CT which makes it louder. Since decibel level is a concern get serious hearing protection, not the stuff sold at the big box store.

 

[sae]

EarplugSuperstore sells a variety pack that lets you pick out of 50 or so different earplugs to find the best fit. Totally worth it for me, I can't handle the skull crushing pressure of most earmuffs.

 

[Grasshopper]

Cool!

Sensgard:

http://www.amazon.com/SensGard-SG-31-Hearing-Protection-Device/dp/B001IMHSP4

Do you have a recommendation on good hearing protection?

I have been using some Dewalt "muffs" that I bought online.

If you are using it properly it is attached to a CT which makes it louder. Since decibel level is a concern get serious hearing protection, not the stuff sold at the big box store.

 

[jamanjeval]

I use these: 3M Peltor X5A

They're only around $29 USD, comfortable and have one of the highest noise reduction ratings.

I have a few of these inexpensive ones that I keep around for others: Harbor Freight Ear Muff Also, I keep a bag of foam earplugs in the top of my SYS-Storage Systainer

When you are looking at noise levels, it is important to remember that there is a distance associated with the measurement, typically 1 meter. If you get closer, the level goes up. Also, exposure allowances are not absolute. Some people may experience hearing loss at lower levels or shorter exposure times. The best rule to follow is that if it makes noise and it isn't something you want to hear, then wear protection. Save you hearing for listening to the voices of loved ones, not power tools.