PPG Aquacron 380 Series

[JCLP]

Happy new year to everyone.
Was wondering if anyone has had any experience with PPG Aquacron 380 series of waterborne acrylic paint. PPG gave me a sample gallon to try. Here is a link.

PPG Aquacron 380

 

[Swordstriper]

It is a SPRAY only coating. Not as flexible as breakthrough so not exceeding dry mil thickness recommendations is important or if there is any caulking involved. Not self priming and appropriate primer seemed only to be available in a grey.

 

[JCLP]

It is a SPRAY only coating. Not as flexible as breakthrough so not exceeding dry mil thickness recommendations is important or if there is any caulking involved. Not self priming and appropriate primer seemed only to be available in a grey.

Thanks for the info.
Using an airless, no thinning, using a FFLP310 tip with pressures set at 500 to 2000 psi at 500 psi increments, I could not get rid of the tails on the fan pattern. Tried a FFLP308 tip with same results. If someone has sprayed this paint with an airless, please let me know.

Now trying the Aquacron 200 series. Starting New thread.

Cheers,
JC

 

[Swordstriper]

Just curious what type of airless setup are you using?