Shopsmith connection

[DGreen]

HI
Newbie here. I purchased a CT36-E and want to connect it to the dust port of a Shopsmith Band saw.  What adapter do I need to connect the supplied hose to a 2 1/4" dust port?  Or do I need a different hose?

Don G

 

[Birdhunter]

Can't directly answer your question, but both Woodcraft and Rockler have lots of adaptors. I'd recommend browsing them to find something to fit.

 

[sancho57]

I'm sure you can rig something up. I've rigged up a 4" connection for mine before.

As bird hunter said lots of adapters out there.

 

[Tinker]

When I need a quick fix I go a plumbing supply, or big box and look thru the Fernco connectors.
Tinker

 

[Bob D.]

This link will give you an idea of the variety available.
http://www.homedepot.com/b/Plumbing-Pipes-Fittings/Fernco/N-5yc1vZbqpfZ4hs

 

[Claimdude]

Don,
I can check the fittings after church today so let me know if you don't get an answer. I have SS and Festool vac. My SS is hooked up to a Jet 1 1/2 hp dust collector though.

Jack

 

[bigmoguls]

Go to Home Depot, buy the 2 1/2" hose kit for their shop vacs (about $25).  It fits the Shopsmith table saw dust extraction port perfectly, you just need to make sure it fits the CT36 intake port. 
http://www.homedepot.com/p/RIDGID-2...Hose-for-RIDGID-Wet-Dry-Vacs-VT2522/203235220

 

[QuailRider43]

I use these adapters to connect 36 mm to 50 mm:https://www.homedepot.ca/en/home/p.3-piece-hose-adapter-kit-for-wetdry-vacuum.1000527708.html