Show your systainer

[Tooms]

Just for fun and because i am curious, can we make an thread with the what your non-standard-product systainer looks like and what you use it for.

Just for fun to look into the toolboxes of the fellow systainer fan.

So post an photo and an small text with each photo...

 

[Tooms]

[attachimg=1]

Cable staple gun - 6 size with 3 in each systainer with matching staples

 

[Tooms]

[attachimg=1]

Brady BMP 21 label printer

 

[Tooms]

[attachimg=1]

Old jigsaw, will be replaced at some date with an festool jigsaw

 

[Tooms]

[attachimg=1]

Angle grinder

 

[GoingMyWay]

[attachimg=1]

My dovetail cutting tools and chisel/plane blade sharpening equipment.

 

[Vondawg]

Drill and drive tool box

 

[Tyler Ernsberger]

[attachimg=1]

 

[grobkuschelig]

Thank you guys for posting!

A lot of good ideas!

I especially like the cork @T. Ernsberger

 

[coho10]

Here's my drill/drive set up. A Sys2 combi with a sortainer.  Works great, though it's a bit heavy if you don't throw it on the vac or sys roll.

 

[coho10]

Here's my first aid kit in an original sys 1

 

[coho10]

My ETS EC 125 and sandpaper in a sys 2

 

[Michael Kellough]

Drill and drive tool box

[member=41086]Vondawg[/member] tell us about the handle you added to the T-lock Sys.

 

[ColossusX]

My trim nailers.  Just a simple box with dividers.

 

[c_dwyer]

A few years ago, I rigged up a Sys 5 classic to use for transporting a mixture of hand tools etc.  I borrowed ideas from previous FOG poster's. Although I don't make a habit of it, the last time it was full, it weighed 40 lbs.

 

[c_dwyer]

Also rigged up a Midi with my drill/reciprocating saw stuff a few years ago. I added a metal plate and adhesive magnet strips to the lid (inside) for saw blades. The adhesive didn't hold up, so I abandoned that idea.

 

[semenza]

A few years ago, I rigged up a Sys 5 classic to use for transporting a mixture of hand tools etc.  I borrowed ideas from previous FOG poster's. Although I don't make a habit of it, the last time it was full, it weighed 40 lbs.

Slick idea with the ties through the lid board.  [thumbs up]

Seth

 

[pettyconstruction]

I have job specific systainers ,
Plumbing, finish guns ,cabinet install equipment ect.
Makes packing tools a lot easier.
I’ll try a few pics tomorrow.
Charlie 

Sent from my iPad using Tapatalk Pro

 

[Dick Mahany]

Do Mini Systainers count ?  [big grin]

[attachimg=1]

 

[Cheese]

Here's a SYS-Toolbox with Granat hand pads on one side and the other side has several microfiber cloths, a plastic bag with tack rags inside, some rubber sanding forms for curves & profiles, a large soft paintbrush for dusting and several packets of very fine sandpaper.

[attachimg=1]