Tom the Remodeler
Member
- Joined
- Dec 30, 2007
- Messages
- 1,106
Hi Gang! Here is my Classified page for a trio of Hilti WSC 267-E circular saw. The WSC 267 is a great saw in it’s own right, and a great complement to the Festool track saws as part of a larger carpentry system.
As a standalone saw, this Hilti saw is uniquely well suited to residential carpentry work. With 1500 watts of available power, paired with an efficient Hypoid (think: Worm Drive) gearing system, the WSC 267 has plenty of torque to rip through tough timbers like LVL beams.
This saw accepts standard 7.25”, 5/8” arbor circular saw blades.
The rear dust port is very efficient at directing chips (there is an air channel to the front cutting point of the blade), and is fully compatible with Festool (D27 and D36), Fein, and Hilti dust extractors, making for a much cleaner work environment.
Variable speed allows you to adjust the blade speed to the material you are cutting, whether that be steel, concrete, wood, plastics, aluminum, etc.....
Front and rear bevel locking levers make for a very stable platform when performing bevel cuts.
A handy depth stop makes plunge cutting to a specific depth an easy operation.
Finally, a groove in the base makes this saw compatible with the common Festool guide tracks, as well as the Hilti and Makita tracks. This allows a user to utilize their Festool saws for fine carpentry, and, using the same tracks, use the Hilti saw for general and rough carpentry.
I am selling these saws because I am transitioning to the Mafell track system and its associated saws (KSS 400 and MT-55cc), so I am selling my TS-75 and Hilti saws.
I have three saws for sale.
The first saw comes with a chip deflector, carrying case, manual, and a rip fence and corresponding hardware. This is my best, most complete saw kit for sale. This saw is in full working order. I am looking for $275 for this saw.
The second saw includes the chip deflector. This saw is in full working order, just without some of the extra accessories found in the first kit. I am looking for $200 for this saw.
The third saw is mechanically sound, with the exception that the rear bevel locking point on the saw base is broken. This means that when the saw is set to a bevel, it only locks at the front point, so it is slightly less stable than the first two saws when cutting at a bevel, but full stable when cutting at a zero bevel. This base plate can be fixed by taking the saw to your local Hilti center. I am asking $150 for this saw.
Please e-mail me with any questions you might have! Shipping on any saw is $50, though it would be my preference to sell locally. Thanks, and have a great day!
As a standalone saw, this Hilti saw is uniquely well suited to residential carpentry work. With 1500 watts of available power, paired with an efficient Hypoid (think: Worm Drive) gearing system, the WSC 267 has plenty of torque to rip through tough timbers like LVL beams.
This saw accepts standard 7.25”, 5/8” arbor circular saw blades.
The rear dust port is very efficient at directing chips (there is an air channel to the front cutting point of the blade), and is fully compatible with Festool (D27 and D36), Fein, and Hilti dust extractors, making for a much cleaner work environment.
Variable speed allows you to adjust the blade speed to the material you are cutting, whether that be steel, concrete, wood, plastics, aluminum, etc.....
Front and rear bevel locking levers make for a very stable platform when performing bevel cuts.
A handy depth stop makes plunge cutting to a specific depth an easy operation.
Finally, a groove in the base makes this saw compatible with the common Festool guide tracks, as well as the Hilti and Makita tracks. This allows a user to utilize their Festool saws for fine carpentry, and, using the same tracks, use the Hilti saw for general and rough carpentry.
I am selling these saws because I am transitioning to the Mafell track system and its associated saws (KSS 400 and MT-55cc), so I am selling my TS-75 and Hilti saws.
I have three saws for sale.
The first saw comes with a chip deflector, carrying case, manual, and a rip fence and corresponding hardware. This is my best, most complete saw kit for sale. This saw is in full working order. I am looking for $275 for this saw.
The second saw includes the chip deflector. This saw is in full working order, just without some of the extra accessories found in the first kit. I am looking for $200 for this saw.
The third saw is mechanically sound, with the exception that the rear bevel locking point on the saw base is broken. This means that when the saw is set to a bevel, it only locks at the front point, so it is slightly less stable than the first two saws when cutting at a bevel, but full stable when cutting at a zero bevel. This base plate can be fixed by taking the saw to your local Hilti center. I am asking $150 for this saw.
Please e-mail me with any questions you might have! Shipping on any saw is $50, though it would be my preference to sell locally. Thanks, and have a great day!
