Speaker stand round over - how to do it?

[sebr023]

Hi all!

I’m building 6 speaker for my home theater.
I will build the bookshelf speaker a stand each.

I designed the whole thing to look like this:



It will be painted 3/4 mdf.

The stands are made like this:
-single 8x10 plate,
-3/4 inch for a round over
-Legs: 2 laminated piece of 3/4, 6x22 inch long piece.
-3/4 inch plate for round over,
-2 thickness of 3/4 10x12in.

I’m not quite sure how I would do this part:



Note that the vertical legs have a round over, and between the leg and the base plate there’s a round over.

Hopefully it come across clearly on the pictures.





So yeah, how would you guys tackle this?

I’m planning on using domino to joint everything together.

I also have a 3d printer if it’s easier to come up with a solution.

 

[nclemmons]

You could use a juice groove or round nose bit in a router table - https://bitsbits.com/?s=juice+groove&post_type=product&dgwt_wcas=1

They also make them with bearings - https://bitsbits.com/?s=cove+bit&post_type=product&dgwt_wcas=1

Nice design on the stand!

 

[peter halle]

I would use a 3/4" cove bit along with a router table for safety.

Peter

 

[Crazyraceguy]

I would do it with a cove bit and probably some kind of jig/template to guide it.