Straight adapter for mini/midi tapered (32mm/27mm) hose?

[MStorm]

Is a straight adapter (dust extractor end) available for the tapered hose used in the CT Mini and Midi?  Perhaps a 27mm adapter could squeeze on the 32 mm end?

I'd like to use two sanders on a CT 26 and have a mini hose I can use for one of the sanders.  I'd attach two hoses to a festool wye (#452898) and I thought a straight adapter would work better to connect to the wye.

I'd also would like to know if large (relatively) inexpensive shop vac hoses will fit my CT 26 and festool's wye fitting.  I'd like to find a 8 or 10 foot hose in 2 or 2.5" dia. to run from the CT 26 to the wye.

Thanks for any tips!

 

[flair woodworks]

To my knowledge, there is not a straight adapter that will work with the dust extractor end of the tapered hose.

While a "Shop Vac" hose may fit between the CT and the wye fitting, note that it won't likely be antistatic.  Festool does make a D50 hose in a 2.5 m length, as well as 4 m.
Link:http://www.ultimatetools.ca/products/anti-static-hoses?variant=4437756228