Sys 1 Mini with Bosch Flexiclick

[Dick Mahany]

I have a Sys 2 with the Bosch Flexiclick in foam and it has considerable extra room inside.  I know that the Flexiclick will pack well into a Sys 1, but wanted to see if it would fit into a Sys 1 Mini with all 4 attachments and a couple of batteries.  It looks like it will, but not in the Mini with the clear lid as the inner clear lid insert prevents the lid from closing.  The charger and a couple of batteries would also fit in a second one.

Probably no advantage to doing this, but I just needed to satisfy my curiosity.

[attachimg=1]

[attachimg=2]

 

[DIY WoodWerx]

Do you have pics of your sys2 Bosch Flexiclick setup?

 

[Dick Mahany]

Do you have pics of your sys2 Bosch Flexiclick setup?

[member=64644]WoodworkTech[/member] Here's the Sys 2 setup.  It has room for another 12V drill or impact driver and possibly more items.  Mine has the attic lid and there are no internal height problems.  Hope this helps.

[attachimg=1]

 

[DIY WoodWerx]

That helps.  What thickness foam did you use?

 

[Dick Mahany]

That helps.  What thickness foam did you use?

Fastcap Kaizen foam ~60mm thick.  I've had excellent luck with that material.

 

[KGB pilot125]

I just got the flex click, I think it is my first ever cordless bosch purchase.  I love it, fits my hand better than the Milwaukee m12 stuff. 
The M12 stuff rubs pretty bad and creates a "hot" spot on my hand in between my thumb and pointer finger. 
Thinking about pairing down the M12 stuff (to much and some redundant stuff) and replacing a few things with Bosch stuff.