T-LOC Inserts for Cadex and Grex Nailers (US)

[Shane Holland]

We are now stocking inserts for Cadex and Grex nailers for your T-LOC Systainer SYS 1 for only $14. We recommend the foam insert for the lid to help keep things in place.

Order now at toolnut.com or festoolproducts.com!
http://www.festoolproducts.com/acce...ies/cadex-nail-guns-compressors.html?q=insert

Shane

 

[yetihunter]

YES!

 

[tjbnwi]

Will the inserts hold the 23 and 21 gauge guns?

Tom

 

[Shane Holland]

Will the inserts hold the 23 and 21 gauge guns?

[member=4105]tjbnwi[/member], we have listed on the website the compatibility, as noted below. Other guns may also fit with slight modification to the foam. If you have a different model and are still interested, email us at info@toolnut.com and we can tell you whether it will work with some cuts to the foam.

Fits Grex P635, P650 and P650L. Designed for use with Festool T-LOC Systainer SYS 1. We recommend also purchasing the Festool foam insert (498044) for the Systainer lid to keep everything in place during transport.

 

[Kev]

Anyone else filled up a Sys2 with boxes of pins? I had a very squeaky voice after lifting it  [embarassed]

 

[Shane Holland]

Anyone else filled up a Sys2 with boxes of pins? I had a very squeaky voice after lifting it  [embarassed]

[popcorn] [big grin]

 

[chrisrosenb]

Anyone else filled up a Sys2 with boxes of pins? I had a very squeaky voice after lifting it  [embarassed]

I have a sys 1 with a 18ga nailer & several boxes of brads in it. It is to heavy as it is. I would not try to fill a sys with brads.
I have a sys 4 with a 15ga nailer and boxes of nails in it. It is lighter than the sys 1.   

 

[Samo]

Will the inserts hold the 23 and 21 gauge guns?

[member=4105]tjbnwi[/member], we have listed on the website the compatibility, as noted below. Other guns may also fit with slight modification to the foam. If you have a different model and are still interested, email us at info@toolnut.com and we can tell you whether it will work with some cuts to the foam.

Fits Grex P635, P650 and P650L. Designed for use with Festool T-LOC Systainer SYS 1. We recommend also purchasing the Festool foam insert (498044) for the Systainer lid to keep everything in place during transport.

Sent an Email to Toolnut yesterday to see if I can fit my Cadex CPB23.35?  I know that is a popular model but the number may have changed since I bought mine. Will post when I get a response.  Hopefully, save someone else the time.

 

[Samo]

Ok, Toolnut Customer Service followed up on this for me. 

"For the Cadex CPB23.35 it should be the INSERT-CPB."

"Ok, just heard back from Cadex. The insert I suggested is the closest one to fit your gun. They stated you might have to make some very slight cuts or changes to make it 100%.
Hope this helps.  Doug"

 

[yetihunter]

This:http://www.cadextools.com/en/?p=863
Goes into this:http://www.festoolproducts.com/acce...-t-loc-systainer-insert-for-grex-nailers.html

-----

I've got my Grex P635 in it. 

If anyone has an Omer 12.40 18 Gauge, it "sort of" fits the polystyrene insert "insert-v2".
Technically, it doesn't without modification.

------

 

[mattdh]

yeti- any chance of you snapping a pic of your grex sitting in there

 

[pettyconstruction]

Anyone else filled up a Sys2 with boxes of pins? I had a very squeaky voice after lifting it  [embarassed]

I have sys 3 with a
Narrow crown stapler
18g gun
15g gun
Some quick clamps and a glue bot.
Oh and a few nails for each.
It's heavy LOL
Charlie

Sent from my iPhone using Tapatalk Pro

 

[yetihunter]

yeti- any chance of you snapping a pic of your grex sitting in there

[member=19294]mattdh[/member]

Perhaps.  [big grin]
It won't fit if the new depth stop is attached.
I took mine off anyway.  A $25 experiment that at least ended better than your average tinder date.

View attachment 1View attachment 2View attachment 3

Here's the Omer in the insert that comes with the new Cadex in systainer models.
Because of the quick release for the top plate thingy on the nose,
it's in there crooked...half in, half out.  Safety is pushed back for it to fit.  No big deal, I'll notch it out when I get to it.

View attachment 4

 

[yetihunter]

Anyone else filled up a Sys2 with boxes of pins? I had a very squeaky voice after lifting it  [embarassed]

I can't imagine how people lug around sortainers filled with hardware.