ts 75 eq blade alignment

[billstuewe]

My track saw had the unfortunate experience of taking a dive off my workbench and hitting the concrete.  There appeared to be no damage but when cutting, the saw would start pulling away from the track.  A micrometer measurement of the blade alignment to the base plate showed the heel to be about .030 farther in.  I have adjusted it back to very close  but does anyone know of a precise way to set it back to spec?

 

[peter halle]

The TS-55 and 75 are similar.  You might want to navigate to this page and then open the supplemental manual for the TS-55 and look for how to set the toe in.  https://www.festoolusa.com/service/owners-manuals#DOMINOJoiners

Peter

 

[Michael Kellough]

If you also have another track saw now is a good time to make them match. Move the 75 out a little to be equal to the other. (TS75 saws usually cut a good bit closer to the aluminum part of the track)

Clamp the other saw to a price of wood (thicker the better) and make a cut with the other saw. Then set the 75 on the track and adjust so that the blade is flush with the fresh cut face of the wood.