Tx10 100mm centrotec bit, where can I get one?

[Elcarpentero]

Anyone know where I can get one of these bits? I know it comes in the assembly kit but I can not for the life of me find just the bit and I don’t want to have to buy the whole kit!

 

[Leemstradamus]

I've posted about my frustration with this. Try toolnut or Hartville.

 

[Elcarpentero]

I've posted about my frustration with this. Try toolnut or Hartville.

Yeah smallest the have is tx15. It shouldn’t bee this hard, t10 is one of the most important bits for finish work…

 

[Imemiter]

A Torx cassette of longer bits would be an immediate buy from me.

 

[Coen]

Festool Bit TX 10-100 CE/2

Festool Bit TX 10-100 CE/2. Beschrijving:.

www.vangroningentools.nl

No article number however.

 

[Coen]

And what about TX8?

Somehow this is never included in standard sets. Wall all ABB (biggest brand) wall-mount boxes for electrical outlets have TX8 / SL combi screws.

 

[six-point socket II]

To the best of my knowledge, there is no Festool brand TX 10 100 mm bit (and also no TX 40 100 mm bit). It’s also not part of any installer’s/assembly package that I know of. Not with the old SYS CE 1-Sort (497628), not with the current SYS3 M 89 ORG CE-SORT (576804) (Would be interesting to see what the dealer linked above delivers/ or if they just cancel the order. In case someone wonders why I also picked the TX 40, it’s because that dealer lists those also …)

There might have been a TX10 100mm bit back when Festool sold the old ‘golden’ colored bits, but if, that was a long, long time ago.

The TX 10 and TX 40 bits included in 576804 are 25mm bits.

Festool Assembly package SYS3 M 89 ORG CE-SORT online

www.festool.com

There are TX 10 and TX 40 bits available as 50 mm variants. However, once inside the centrotec chuck, they are far from 50 mm bits. …

Festool Bits TX 10-50 CENTRO/2 online

www.festool.com

Festool Bits TX 40-50 CENTRO/2 online

www.festool.com

Kind regards,
Oliver

—-

497628


Old attic lid 100 mm set


Old attic lid 50 mm set.

 

[rst]

Go to Chadstoolbox. com, they have a chat box and ask. I can’t imagine they do not have

 

[semenza]

Chadstoolbox doesn't sell Festool. I think the OP is looking for the
Centrotec feature.

 

[Cheese]

I concur with Oliver...I've not seen that sized bit offered by Festool. Apex offers those sized bits but they are not Centrotec...although they could be modified to work.

 

[Coen]

To the best of my knowledge, there is no Festool brand TX 10 100 mm bit (and also no TX 40 100 mm bit). It’s also not part of any installer’s/assembly package that I know of. Not with the old SYS CE 1-Sort (497628), not with the current SYS3 M 89 ORG CE-SORT (576804) (Would be interesting to see what the dealer linked above delivers/ or if they just cancel the order. In case someone wonders why I also picked the TX 40, it’s because that dealer lists those also …)

You can email him to ask.
But nowhere on the page it says they are Centrotec bits anyway.

Or if you order I can go pick them up

Can also just use regular 50mm or 75mm bit, take a Festool BH 60 CE and glue the bit with some Loctite 222 or 243

 

[Elcarpentero]

To the best of my knowledge, there is no Festool brand TX 10 100 mm bit (and also no TX 40 100 mm bit). It’s also not part of any installer’s/assembly package that I know of. Not with the old SYS CE 1-Sort (497628), not with the current SYS3 M 89 ORG CE-SORT (576804) (Would be interesting to see what the dealer linked above delivers/ or if they just cancel the order. In case someone wonders why I also picked the TX 40, it’s because that dealer lists those also …)

There might have been a TX10 100mm bit back when Festool sold the old ‘golden’ colored bits, but if, that was a long, long time ago.

The TX 10 and TX 40 bits included in 576804 are 25mm bits.

Festool Assembly package SYS3 M 89 ORG CE-SORT online

www.festool.com

There are TX 10 and TX 40 bits available as 50 mm variants. However, once inside the centrotec chuck, they are far from 50 mm bits. …

Festool Bits TX 10-50 CENTRO/2 online

www.festool.com

Festool Bits TX 40-50 CENTRO/2 online

www.festool.com

Kind regards,
Oliver

—-

497628
View attachment 375511

Old attic lid 100 mm set
View attachment 375512

Old attic lid 50 mm set.
View attachment 375513

The tx 10 100 is available in the current assembly package offered in Europe
https://www.amazon.com/Festool-5768...cphy=1014248&hvtargid=pla-2281435177418&psc=1

 

[Coen]

I don't know where you looked, but per Festool description the 100mm bits in that set start at TX 15

 

[Elcarpentero]

I don't know where you looked, but per Festool description the 100mm bits in that set start at TX 15

This is what I looked at

 

[Elcarpentero]

 

[Elcarpentero]

You can email him to ask.
But nowhere on the page it says they are Centrotec bits anyway.

Or if you order I can go pick them up

Can also just use regular 50mm or 75mm bit, take a Festool BH 60 CE and glue the bit with some Loctite 222 or 243

I concur with Oliver...I've not seen that sized bit offered by Festool. Apex offers those sized bits but they are not Centrotec...although they could be modified to work.

 

[Elcarpentero]

To the best of my knowledge, there is no Festool brand TX 10 100 mm bit (and also no TX 40 100 mm bit). It’s also not part of any installer’s/assembly package that I know of. Not with the old SYS CE 1-Sort (497628), not with the current SYS3 M 89 ORG CE-SORT (576804) (Would be interesting to see what the dealer linked above delivers/ or if they just cancel the order. In case someone wonders why I also picked the TX 40, it’s because that dealer lists those also …)

There might have been a TX10 100mm bit back when Festool sold the old ‘golden’ colored bits, but if, that was a long, long time ago.

The TX 10 and TX 40 bits included in 576804 are 25mm bits.

Festool Assembly package SYS3 M 89 ORG CE-SORT online

www.festool.com

There are TX 10 and TX 40 bits available as 50 mm variants. However, once inside the centrotec chuck, they are far from 50 mm bits. …

Festool Bits TX 10-50 CENTRO/2 online

www.festool.com

Festool Bits TX 40-50 CENTRO/2 online

www.festool.com

Kind regards,
Oliver

—-

497628
View attachment 375511

Old attic lid 100 mm set
View attachment 375512

Old attic lid 50 mm set.
View attachment 375513

 

[Cheese]

I don't know where you looked, but per Festool description the 100mm bits in that set start at TX 15

Per Coen's post...this is the Torx drive selection in the 576804 SYS3 M 89 ORG CE-SORT.

Further, the only SYS ORGs that I'm aware of that contains a 100mm long TX 10 driver are the 576931 & 576932.

@Coen , do you have any idea why there's such a huge difference in price between the 576931 & 576932?

They're basically the same set with either metric or imperial drill bits. Both are available from Amazon, 576931 for $334 and 576932 for $259.

 

[Elcarpentero]

Per Coen's post...this is the Torx drive selection in the 576804 SYS3 M 89 ORG CE-SORT.

Further, the only SYS ORGs that I'm aware of that contains a 100mm long TX 10 driver are the 576931 & 576932.

@Coen , do you have any idea why there's such a huge difference in price between the 576931 & 576932?

They're basically the same set with either metric or imperial drill bits. Both are available from Amazon, 576931 for $334 and 576932 for $259.

The whole point of my post is I want to buy that bit without having to buy the whole set. In response, multiple people have told me the bit does not exist.

 

[Cheese]

The whole point of my post is I want to buy that bit without having to buy the whole set. In response, multiple people have told me the bit does not exist.

I know...that's the reason in my original post I mentioned that I had not seen that size offered as a single item by Festool.

A similar situation has played out on many of the bits that Festool offers.