Un-Safe way to make Domino tenons

[Packard]

I have literally seen what a missile launcher this can be. It is just as bad as a table saw kickback.

Ambush accident.

It is intuitive to keep your hands away from spinning blades. But intuition gives no warning about kick-back. Someone has to teach you about that.

I’m self-taught on the table saw. I read about kick-back and was wary of it.

I never read about kick-up from feeding short pieces between the blade and fence. The piece was over an inch wide, and about 6” long. Kicked up and sent me to the emergency room, where the doctor removed the rest of the torn fingernail and gave me a tetanus shot.

Never saw it coming.

Once you are wary of trapping material, you should be OK.

I read a book that suggested mounting two rip blades in a table saw with spacers so you could rip narrow strips efficiently. I never tried it. It seems like a doubly risky kick back situation. Especially since the rip blades shown were carbon steel with no carbide tips. Making it more likely to bind.

In any case it is the responsibility the experienced to warn beginners of risks.

 

[Crazyraceguy]

Ambush accident.

It is intuitive to keep your hands away from spinning blades. But intuition gives no warning about kick-back. Someone has to teach you about that.

I’m self-taught on the table saw. I read about kick-back and was wary of it.

I never read about kick-up from feeding short pieces between the blade and fence. The piece was over an inch wide, and about 6” long. Kicked up and sent me to the emergency room, where the doctor removed the rest of the torn fingernail and gave me a tetanus shot.

Never saw it coming.

Once you are wary of trapping material, you should be OK.

I read a book that suggested mounting two rip blades in a table saw with spacers so you could rip narrow strips efficiently. I never tried it. It seems like a doubly risky kick back situation. Especially since the rip blades shown were carbon steel with no carbide tips. Making it more likely to bind.

In any case it is the responsibility the experienced to warn beginners of risks.

Responsibility is kind of strong, but I do agree, it should be that way.

 

[luvmytoolz]

I have literally seen what a missile launcher this can be. It is just as bad as a table saw kickback.

The Vasectomiser 2000!

 

[PaulMarcel]

The Vasectomiser 2000!

Oh man, that's nuts!

 

[Packard]

0

Responsibility is kind of strong, but I do agree, it should be that way.

If you see someone, even a stranger, doing something very risky, you won’t be a busy-body and give them fair warning? If I don’t do that, and I later find out that they had an accident because of that issue, I would feel very bad about my neglect. But that’s me. Everyone is different.

However, I do think it is a responsibility. I think it goes beyond the urge to educate.

One time, I was driving and I saw the passenger door on the car in the next lane was not properly latched. I tooted my horn. The passenger was a young woman. I explained that her door was not properly closed. She aid, “Just how many people have you seen fall out of a moving car?” And I replied, “Just one.”

She opened and then re-closed the door and I gave her a thumbs up.

Potential headlines: YOUNG WOMAN FALLS OUT OF MOVING CAR. PACKARD NEVER WARNED HER!!!

Note: I actually never saw someone fall out of a moving car. That mainly because I was the one who fell out. (Low speed, so just minor scrapes and bruises. I was about 8 years old at the time.)