Using Leigh RTJ400 Dovetail Jig with CMS Router Table

[Twin driver]

I'd like to buy and use this jig but based on the specs I've seen I'm not sure how to modify ... or acquire the proper accessories ..... to make it work on the Festool CMS Router Table.

The Router Table has to be able to accomodate a Leigh E7 or E10 Guide Bushing. They say the ring that the bushing fits into uses standard Porter Cable dimensions. None of the Festool supplied rings I have include the 1 3/8 in diameter (outside) and 1 3/16 diameter (inside) measurement to fit the E Bushings.

Has anyone out there with a CMS Router Table used the subject jig on it? Did you have to make any modifications? Any specific recommendations I could pursue to make it workable on the CMS?

Any suggestions on another Brand of Jig that would work well with the CMS if this one cannot be made to work?

Thanks.

 

[GarryMartin]

It's not massively straightforward and requires some lateral thought, but it is possible.
http://festoolownersgroup.com/festool-jigs-tool-enhancements/leigh-rtj400/msg358047/#msg358047
http://festoolownersgroup.com/class...-bushing-insert-for-sale/msg365590/#msg365590
http://festoolownersgroup.com/festo...ol-cms-with-leigh-rtj400/msg488418/#msg488418

 

[Twin driver]

Thanks Garry. I appreciate the assist.

It looks like the easiest approach is Option 2 in your attachments .... just buy it.

I just sent off an email asking if the offer from 1/2015 for sale is still in effect.

Dick