- Joined
- Feb 8, 2007
- Messages
- 1,671
was hired to build a 15' wall unit and had to emphasize the painting that was special to them I could not use any wire, hangers etc and attach to the back.. so I made a stand.
I used a sheet of ply with 4 legs on it 3" tall so it would stand off the back of the cabinet and put a back light behind it.. then I used some oak as a clamp type to hold the painting in place...
so I used the domino and made to slots on each board top and bottom.. so then you put the painting on the stand and then push the 2 pieces of oak into the slot with dominos and then it can be taken on and off just wiggle a bit and it comes off... brilliant... thanks again festool biscuits would not have done this !
will post finished pics end of week when done with doors.
[attachimg=#]
I used a sheet of ply with 4 legs on it 3" tall so it would stand off the back of the cabinet and put a back light behind it.. then I used some oak as a clamp type to hold the painting in place...
so I used the domino and made to slots on each board top and bottom.. so then you put the painting on the stand and then push the 2 pieces of oak into the slot with dominos and then it can be taken on and off just wiggle a bit and it comes off... brilliant... thanks again festool biscuits would not have done this !
will post finished pics end of week when done with doors.
[attachimg=#]