Vacuum hose wear

[David cross]

I love festool products and have had a ct 26 for 4 months. I noticed recently the first 2-3 ft of the vacuum hose, closest to the tool are getting really worn. I could make a smooth 'sock' to stop the hose catching on guide rails. Bench top etc...
Does anybody have any ideas to help me prolong the life of my hose? David cross

 

[Kev]

There are actually "sock like" products on the market for this very purpose. Not sure about local supply for you though .... hopefully someone will chime in.

 

[peter halle]

David,

If you do a search for the word "sleeve" you will find quite a few threads.  Here is one:  http://festoolownersgroup.com/festool-jigs-tool-enhancements/gorrila-sleeve/

Peter

 

[Brice Burrell]

I doubt your hose is worn, scratched and dirty looking but probably not worn.  My oldest CT hose, from 2006 I believe, is beat up and it's not round anymore, however, it still functions fine.  Go for the sleeve all the same do the hose gets caught less on the rail.  

 

[gkaiseril]

If you can keep the hose above the tool by putting over your shoulder, add a hose holder to the dust extractor, or add a boom arm.